User Manual
51
Battery Replacement
50
Battery Replacement
Remove the battery.
Using your fingers only in the area marked with , unplug the connector first, and
then remove the battery, as shown below.
• When disconnecting the battery cable, pull by the plug, not the cable.
• Please recycle the used battery (p. 52).
Wait at least 10 seconds, then insert the new battery.
Make sure the battery is oriented correctly, as shown below.
• Waiting 10 seconds will allow the power LED to reset correctly.
Replace the battery cover.
After replacing the battery cover, tighten the two screws, being careful not to
overtighten them.
IMPORTANT: Always be sure to replace the battery cover and tighten the screws
before resuming use.
Recharge the GamePad
Always recharge the GamePad battery after replacing it (p. 18).
Turn the power on
Press on the WiiU GamePad to turn the Wii U
console on.
WiiU Pro Controller
Do not use any battery other than the WiiU Pro Controller rechargeable battery,
Model No. CTR-003.
A replacement battery can be ordered from the Nintendo website at store.nintendo.com.
(USA/Canada only) or by calling Customer Service at 1-800-255-3700.
• Before replacing the battery, turn the WiiU console power off and disconnect the USB
cable if it is connected to the controller.
Loosen the screw and remove the battery cover.
The battery cover is designed so the screw can be loosened, but not fully removed.
NOTE: To avoid damage to the screw or threads, use a screwdriver that is appropriate
for the screw (crosshead style, size 0).
Remove the battery.
Insert the stylus from the WiiU GamePad under the battery, as shown below, and gently
lift the edge, allowing you to remove the battery.
• Please recycle the used battery (p. 52).
Wait at least 10 seconds before inserting the new battery.
Make sure the battery is oriented correctly, as show
in the illustration.
• Waiting 10 seconds will allow the power LED to reset
correctly.