PlayStation®Move motion controller Instruction Manual CECH-ZCM1E 7028429
EN Before use ˎˎ Carefully read this manual and any manuals for compatible hardware. Retain instructions for future reference. ˎˎ Always update your system to the latest version of the system software. Precautions Safety ˎˎ Avoid prolonged use of this product. Take a 15-minute break during each hour of play. using this product immediately if you begin to feel tired or if you experience discomfort or pain in your hands or arms during use. If the condition persists, consult a doctor.
Exterior protection Follow the instructions below to help prevent the product exterior from deteriorating or becoming discoloured. ˎˎ Do not place any rubber or vinyl materials on the product exterior for an extended period of time. ˎˎ Use a soft, dry cloth to clean the product. Do not use solvents or other chemicals. Do not wipe with a chemically-treated cleaning cloth.
Bottom view USB connector 1 2 3 Extension connector Turn on your PlayStation®4 system. Connect your controller to the PS4™ system with a USB cable. Use the USB cable supplied with the controller. Press the (PS) button on your controller. The controller is paired with the PS4™ system. Hints ˎˎ Follow Getting started Attaching the supplied strap Follow the diagram to attach the strap. the same steps to pair the controller with a PlayStation®3 system.
ˎˎ On Using your controller Notice Always disconnect the USB cable before use. 1 2 3 a PS3™ system, you can check the assigned controller (PS) number on the screen by pressing and holding the button. ˎˎ To quit a game, press and hold the (PS) button, and then follow the on-screen instructions. Adjusting the controller settings Turn on your PS4™ system. Press the (PS) button on your motion controller. The controller is automatically assigned to a user. Wear the strap on your wrist.
Charging your controller Charge your controller by connecting it to a PS4™ system or a PS3™ system that is turned on, using the USB cable supplied with the controller. The status indicator of the motion controller blinks slowly, and charging begins. The status indicator stops blinking when charging is complete. Hints ˎˎ You can also charge your controller while the PS4™ system is in rest mode.
Resetting your controller If the motion controller responds abnormally or does not work as intended, try resetting it by pressing the reset button on the back of the controller with a fine-tipped object such as a pen. Reset button Specifications Power consumption DC 5 V, 800 mA Battery type Built-in, rechargeable Lithium-ion battery Battery voltage DC 3.6 V Battery capacity 1380 mAh Operating temperature 5°C – 35°C External dimensions (excluding maximum projecting part) Approx.
GUARANTEE This product is covered for 12 months from date of purchase by the manufacturer’s guarantee. Please refer to the guarantee supplied in the PS4™ package for full details. This product has been manufactured by or on behalf of Sony Interactive Entertainment Inc., 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. Imported into Europe and Distributed by Sony Interactive Entertainment Europe Ltd, 10 Great Marlborough Street, London, W1F 7LP, United Kingdom.
“ ”, “PlayStation”, “ “SONY” and “ ” and “ ” are registered trademarks or trademarks of Sony Interactive Entertainment Inc. ” are registered trademarks or trademarks of Sony Corporation. eu.playstation.com/ps4 © 2016 Sony Interactive Entertainment Europe Limited. All rights reserved.
