User Manual

NÜO AWA Manual
Installation NÜO AWA
6
FLUSH MOUNTING
The NÜO AWA reader can be ush mounted in various environments.
Follow the detailed instructions below to install it correctly:
1) Remove the reader from the ush mount
support using the detachable clip.
Insert the clip and pull down.
2) Using a level, make a hole in the wall
measuring 92 x 92 mm and 51 mm deep.
Pass the connecting cable through and grout
the hole.
3) Insert the ush mount support and connect
the assembly.
4) Insert the reader module into the ush
mount support using the detachable clip.
Insert the clip and pull down.
5) Fit the reader module and remove the
detachable clip.
Plaster