Owners Manual

BYD AUTO F3 OWNER’S MANUAL
112
Sensing area
The sensing area (i.e. the maximal
distance from “A”) of the sensor
reaches to about 1100mm.
Apperceive is limited, so you have to
check the surroundings before
starting driving and get vehicle
started slowly.
CAUTION
Do not affix something onto sensor.
Otherwise, this may cause the
system not to work normally and
even an accident.
The system may not work normally
at following conditions:
● There is something on the sensor,
for example, ice, snow, slurry
and so on.
● The vehicle has been parked at
higher temperature and lower
temperature surrounding for long
time.
● The vehicle is driven at muddy,
rude, or other special road.
● The vehicle is near the objects
which can eradiate ultrasonic,
such as vehicle horn, motor of
motorcycle and so on.
● Drive the vehicle when it rains
heavy or water spatters on
vehicle.
● Install the dual-pass wireless
antenna or buffer.
● The center of gravity is
acclivitous.
● The sensor is shielded by hand.
● The vehicle is too near to objects.
● The sensor is knocked seriously.
If the following things come near
the sensor, the system may fails to
work:
● Metal lead wire, cord, or thin
objects
● Cotton, snowflakes or objects
with absorbency
● Small objects
● Objects with sharp ends
● High and protuberant objects
Please contact your BYD AUTO
service station at following
situations:
● The bumpers are destroyed or
sunken.
● The indicator is solid on but the
buzzer does not beep.