Owners Manual

BYD AUTO F3 OWNER’S MANUAL
123
Before starting the engine
1. Check the area around the vehicle
before entering it.
2. Adjust the seat position, seat
height, seatback angle, head
restraint, and steering wheel
angle.
3. Adjust the inside and outside rear
view mirrors.
4. Lock all doors.
5. Fasten seat belts
To use wireless remote control to
lock the vehicle, press “UNLOCK” to
unlock the vehicle. Otherwise, you
can not start the engine.
Starting the engine
(a) before starting
1. Apply the parking brake firmly.
2. Close all lights and other devices
which are not needed.
3. Shift the transmission into
neutral.
4. Trample death on the clutch
pedal till your vehicle starts.
5. Turn off the anti-theft system.
(b) Start the engine
Before starting the engine, be sure to
follow the instructions in “(a) before
starting”.
Normal starting procedures
The multi-point fuel injection system
in engine will automatically control a
proper mixture of the air and fuel for
start.
Follow the procedures listed below
for warm or cool start of the engine.
Start the engine by turning the key to
“START”. Release it after the engine
starts.
Engine gets heating up by running but
idling. Run the engine steadily to
warm up the vehicle till the
temperature of engine coolant rises to
normal range.