Owners Manual

BYD AUTO F3 OWNER’S MANUAL
139
Changing wheels
Remove the wheel nuts and change
the tire.
Lift the flat tire straight off and put it
aside.
Roll the spare wheel into position and
align the holes in the wheel with the
bolts. Then lift up the wheel and get
at least the top bolt started through its
hole. Wiggle the tire and press it back
over the other bolts.
Before putting on wheels, remove any
corrosion on the mounting surfaces
with a wire brush or such. Installation
of wheels without good
metal-to-metal contact at the
mounting surface can cause wheel
nuts to loosen and eventually cause a
wheel to come off while driving.
Re-installing all wheel nuts
Reinstall the wheel nuts with the
tapered end inward and tighten them
as much as you can by hand. Push on
tire back and see if you can tighten
them more.