Owners Manual

BYD AUTO F3 OWNER’S MANUAL
140
CAUTION
Never use oil or grease on the bolts
or nuts. Doing so may lead to over
tightening the nuts and damaging
the bolts. The nuts may loose and
the wheels may fall off, which could
cause a serious accident. If there is
oil or grease on any bolt or nut,
clean it.
Lowering your vehicle
Lower the vehicle completely and
tighten the wheel nuts.
To lower the vehicle, turn the jack
handle anticlockwise.
Use only the wheel nut wrench to
tighten the nuts. Do not use other
tools or any additional leverage other
than your hands, such as a hammer,
pipe or your foots, make sure the
wrench is securely engaged over the
nut.
Tighten each nut a little at a time in
the order shown. Repeat the process
until all the nuts are tightened.
CAUTION
● When lowering the vehicle,
make sure all portions of your
body and all other persons
around will not be injured as
the vehicle is lowered to the
ground.
● Have the wheel nuts tightened
with torque wrench to 103N•m
(10.5kgf•m), as soon as possible
after changing wheels.
Otherwise, the nuts may loosen
and the wheels may fall off,
which could cause a serious
accident.