Owners Manual

BYD AUTO F3 OWNER’S MANUAL
178
Checking and replacing fuses
Type A
Type B
Type C
If the headlights or other electrical
components do not work, check the
fuses. If any of the fuses are blown,
they must be replaced.
See the “Fuse locations” part in
Section 7-1 for locating the fuses.
Turn the ignition switch and
inoperative component off. Pull the
suspected fuse straight out and
check it.
Determine which fuse may cause the
problem. The lid of the fuse box
shows the name of the circuit for each
fuse. See Section 8 for the functions
controlled by each circuit.
Type A fuses can be pulled out with a
pull-out-tool. For the location of the
pull out tool, refer to number 19 in
the figure in Section 8.
If you do not ensure whether the fuse
has blown, try replacing the suspected
fuse with the one that you know is
good.
If the fuse has blown, push a new
fuse into the clip.
Only install a fuse with the amperage
rating designated on the fuse box lid.
If you do not have a spare fuse, you
can pull out the “DUME” fuse upon
an emergency, which may be
dispensable for normal driving, and
use it if its amperage rating is the
same.