Owners Manual

BYDAUTO F3 OWNER’S MANUAL
57
Turn signal lights
To signal a turn, push the left
multi-function switch up or down
to position 1.
The key must be in the “ON”
position.
The lever automatically returns after
you make a turn. But you may have
to return it by hand after you change a
lane.
To signal a lane change, move the
lever up or down to the pressure point
(position 2) and hold it.
If the turn signal indicator lights
(green lights) on the instrument panel
flash faster than normal, it means that
a front or rear turn signal bulb is
burned out.
Headlights and turn signal lights
(with automatic light control
system---optional)
Headlights
To turn on the following lights,
turn the light adjusting switch:
Position 1: position lights, license
plate and instrument panel lights.
The indicator light (green light) for
position lights on the instrument
panel will tell you that the tail light
are on.
Position 2: headlights and all lights
said above.
Position 3 (“AUTO”): headlights and
all of the light in position 2.
They automatically turn on or off
depending on the darkness of the
surroundings.
When you drive the vehicle into a
tunnel, garage or other dark
surrounding where needs light
immediately, turn the switch to
position 2 manually.