Owners Manual

BYD AUTO F3 OWNER’S MANUAL
67
Fuel gauge
When the ignition switch is at
“ON” position, the gauge indicates
the approximate quantity of the
fuel remaining in the tank.
Nearly full: needle at “F”
Nearly empty: needle at “E”
It’s necessary to keep 1/4 tank of fuel.
The needle moves when braking,
accelerating or making turns. This is
caused by the fuel moving in the tank.
Reminding of filling the fuel:
if it becomes yellow when needle at
“E”, please fill the fuel.
When you are driving on the slope or
turning, the fuel in the tank will be
caused to swash. Needle of fuel gauge
would sway or warning light of fuel
quantity would usually be on earlier.
When the ignition key is at “ON”
position, there is no malfunction even
if needle of fuel gauge is at “E”.
Engine coolant temperature gauge
The gauge indicates the engine
coolant temperature when the
ignition switch stays at “ON”
position. Working temperature of
the engine varies with weather and
load of the engine.
If the needle moves into the red zone,
your engine is too hot. If you vehicle
overheats, park your vehicle and
allow the engine to cool.
Your vehicle may overheat during
severe operating condition, such as:
● Driving up a long hill on a hot
day.
● Idling for a long period with the
air conditioning on in
stop-and-go traffic.
● Daggling other vehicles.
When the ignition switch is in
“START” position, there is no
malfunction even if the engine
coolant temperature gauge needle
returns to “C”.