Owners Manual

BYD AUTO F3 OWNER’S MANUAL
85
Instruction of eliminating on-board CD malfunction
Failure Reason Solution
1 No power or sound
1. The ignition switch is not
turned on.
2. The wire is not connected
properly.
1. Turn the vehicle key to
“ACC” or “ON”.
2. Check the wire connection.
2 No sound with disk put in
1. The disk is put in reversely.
2. The disk is dirty or
scratched seriously.
1. Put in the disk correctly.
2. Wipe the disk or change a
new one
3
Unstable sound caused by
vibration
1. Installation is infirm.
2. The disk is dirty or
scratched seriously.
1. Fix the machine with
installation parts.
2. Clean up the disk or change
a new one.
4
Can not store channels and the
preset broadcast
The battery line is connected
improperly.
Connect the cable to correct pole.
5
The noise sent by FM
stereophony and single channel
broadcast give are too loud
The broadcasting station is far
away or the signal is excessively
weak.
Choose other broadcasting
station with stronger signal.