Owner’s Manual

BYD AUTO F6 OWNER’S MANUAL
6
Three-point safety belt
The seat belt restrains you by a belt across
your shoulders, chest and hip.
To fasten your belt, pull it out of the
retractor and insert the tab into the buckle.
Pull the belt to make sure the tab and the
buckle are locked.
To release the belt, press the red ―Press‖
buckle-release button and allow the belt to
retract.
Your seat belt system also
includes an indicator on the instrument
panel and a buzzer to remind you and your
passengers to fasten your seat belts.
Safety belt tensioner (optional)
Automatic tensioner is mainly designed to
activate in any frontal collision. The
tensioner is interlinked with airbags, in a
collision severe enough to cause the airbag
to deploy; the automatic tensioner also can
provide help.
When the automatic tensioners are activated,
seat belts will maintain tight state until they
are unlocked.
The SRS light will be lit
up to alerts you to a potential problem with
your seat belt tensioner. (Refer to 30
th
page).
Friendly tips
1 Seat belts are designed to support the
body's bones. So wear the seat belts
across the front of the pelvisl as low as
possible, that is to say, the belts should
across the pelvis, chest and shoulder.
Please avoid belt acrossing the
abdomen.
2 You may try to find comfortable
status when wearing seat belts, but the
belt shall be pulled to tension, so that
the design can achieve the protective
effect. Loosed seat belts will greatly
reduce the protection function.
3 Not wear twisted seat belts.
4 Each seat belt can only be used by
one person. Run seat belts around
children in the arms are extremely
dangerous.