Owner’s Manual

BYD AUTO F6 OWNER’S MANUAL
150
Engine malfunction indicator
The indicator is on for several seconds
when turning ignition switch to ON (Ⅱ).
That shows a control system of the engine
or transmission may have failure. You may
not feel unmoral, but the failure may lower
ability of saving fuel and cause more
emission. You may cause more serious hurt
when go on working at the state.
If the indicator is on, park your vehicle at
the road and close engine. Anew start
engine and check up the indicator. If the
indicator is still on, call BYD authorized
service station for checking up your vehicle.
Before the repairman come, carefully drive
to avoid the throttle valve full opening and
drive at a high speed. If the indicator is
frequently on, even if close it according to
the above step, it is necessary to call BYD
authorized service station for repairing.
Friendly tip
If go on driving vehicle when the
malfunction indicator is on. That will
hurt emission system and the engine. Its
repair isn‘t included in the maintenance.
Brake system indicator
The indicator will be on when turning
ignition switch to ON (Ⅱ). It reminds you
to check up the parking handle. If you don‘t
fully put it down, the indicator will be
always on.
Whenever the indicator is on, it shows that
brake system has failure. The problem is
mainly that the level of brake liquid is too
low.
Step the brake pedal lightly to test whether
it is normal. If normal, you should check up
the level of brake liquid (refer to 112nd
page) in the next fuel station. If there is a
low level, you should drive to BYD
authorized service station to check up
whether the brake system has symbol of
brake system leakage and the wearing
extent of brake disc.
But, if the brake pedal is unmoral, you
should take measures immediately, because
the design of brake system is dual loop.
Even if a part of system has failure, other
both wheels are still broken. The time you
must step pedal deeply, the vehicle can
decelerate and the brake distance also is
longer.