Owner’s Manual

BYD AUTO F6 OWNER’S MANUAL
158
Notice
If your BYD vehicle can not use
Flat-bed Equipment to transport, you
should use Wheel-lift Equipment to
transport. If, due to damage, your
vehicle must be towed with the front
wheels on the ground, do the following:
Manual transmission:
1 Release the parking brake.
2 put the transmission in Neutral.
3 Leave the ignition switch in the
ACCESSORY (Ⅰ) position, so the
steering wheel does not lock.
Automatic transmission:
1 Release the parking brake.
2 Start the engine.
3 Shift to Drive, then to Neutral.
4 turn off the engine.
5 Leave the ignition switch in the
ACCESSORY (Ⅰ) position, so the
steering wheel does not lock.
CVT transmission:
The model with VT2-04O transmission
cannot haul, because only when the engine
runs, can the cone pulley produce oil
pressure, and then the drive belt can run.
Thus, the front wheel must be raised to
begin hauling (hanging hauling)
3．If you can not find trailer company while
occurring emergency faults, you can use
towing hook to tow the vehicle. There is a
decoration cover on the humper under the
right front headlight. Remove the cover, and
take out the towing hook from vehicle tools
and screw into the towing hook bracket and
tightening it, use the special trailer cable.
You must be careful while towing the
vehicle. For CVT vehicle, the gear must be
put on ―N‖ and the engine must run in case
of emergent traction. Only if the engine runs,
can the oil pump of the transmission
provide oil pressure and the drive belt can
run, or it will damage the drive belt.
The driver must sit in the towed vehicle;
operate the vehicle and the brakes
Notice
We do not recommend to use towing
hook to tow the vehicle with four-wheel
on the ground, it is best to call a
professional towing service or an
organization.
You can only use the towing hook on
the vehicle, or you will damage your
vehicle. Do not tow the vehicle from
the backside of vehicle with four-wheel
on the ground, or it can damage your
vehicle.
Towing hook bracket