Owner’s Manual

BYD AUTO F6 OWNER’S MANUAL
30
Sunlight illumination sensor
Sunlight illumination sensor is located on
the top of instrument panel and beside left
front treble loudspeaker. Do not cover the
sensor or spatter any liquid.
If you remove the key from the ignition
switch with lights turned on, you will hear a
reminder chime for turning off the lights
when you open the driver‘s door.
To switch dipped lights to high beams, push
the lever forward until you hear a click. The
high beam indicator will be on
To switch back to dipped lights, pull the
lever back.
To flash the high beams, pull the lever
slightly back, and then release it. The high
beams will turn on then go out.
The high beams will always remains on if
you pull the turning signal rod and do not
release it, no matter which position the front
headlight switch is in.