Owner’s Manual

BYD AUTO F6 OWNER’S MANUAL
59
Full-automatic mode operation
Set the interior air control to the
full-automatic mode, press the AUTO
button, and then rotate the temperature
control knob of driver side to set it to the
desired temperature.
The system display will show the ―AUTO‖.
The system will automatically mix the
adjusted or heated air properly. This can
make the temperature raise or lower to the
setting temperature rapidly.
When the temperature is set to (L0) or (HI),
the system works only under full cooling or
full heating mode, and can‘t control the
interior temperature.
When the temperature is setted between
(L0)and (HI),the temperature can be
controlled to set temperature.
OFF button
Press the (OFF) button, and the interior air
control system is closed fully. For avoiding
the poor and moldy air cumulation, you
should often keep the fan working.
Semi-automatic mode operation
In FULL AUTO, you can choose all
function of interior air control system
manually while keeping the other functions
under automatic control. Any manual
selection will make the ―AUTO‖ disappear.
A/C switch
Press the A/C button to turn the air
condition on or off. The display shows‖ A/C
ON‖ or‖ A/C OFF‖.
When the A/C is off, the system can‘t
control interior temperature when you set
the temperature to be below the exterior
temperature by the knob, , when the A/C is
on, you can adjust the temperature to a
comfortable setting value by the
temperature control knob.