Owner`s manual

BYD AUTO S6, S6A, S6K Owner's Manual
Self-maintenance 7-12
fail due to overheating. If over-inflated,
the ride may be more harsh, and it
would be easier to cause damage
from road hazards, as well as cause
uneven wear.
For the recommended tyre pressures,
please refer to the placard on the
driver's door frame for correct
pressures when the tyres are cold.
Inspection
Every time you check the tyre pressure,
examine the tyres for damage, foreign
objects and abrasion as well.
a. Replace the tyre if you find damage
and bulges on the tyre tread or sides.
b. There are cuts, splits or cracks on
the tyre sides. Replace the tyre if its
fabric or cord is exposed.
c. Replace if the tread is worn
excessively.
Tips
●Maintain the correct tyre pressure
in case of the following conditions:
1）Low tyre pressure (insufficient air
filling)
2）Excessive wear
3）Abnormal wear
4）Hard steering
5）Air leakage due to overheating of
tyres
6）Deteriorated sealability at the
edge of tyre.
7）Deformation of wheel and/or
detachment of tyre and wheel
8）High Tyre Pressure (excessive air
filling)
9）Difficulty in operation
10）Excessive wear of centre of tyre
tread
The tyres have wear marks moulded
into the tread. When the tread wears
down, you will see a wide band
across the tread. This means that
there is less than 1.6 mm of tread left
on the tyre. As for this kind of tyre, it
may give very little adhesive force on
wet roads. Replace the tyre if you see
Tread wear marks