User Manual

9. Install the spring bar which is packed together with rest of the tools, by placing it under the gears
below the foot bar with hooks facing upward.
REFORMER INSTALLATION
1. Lift the reformer frame and remove it from the main box.
2. Remove the protective cardboard and take out the carton containing the upholstery.
3. Inside the carton, you will find the tools necessary to complete the installation of the Pilates Reformer.
4. Clean all frames, cart and upholstery with a damp cloth. Place the frame in a place where you want
it permanently.
5. Install the cart by putting the cart onto the frame with head-rest facing the opposite end of the foot
bar.
6. Connect the docks at the bottom of the cart.
7. Attach the bracket with five holes under the cart.
8. Hook the spring into the holes. The open end of the hook must face the ground. The bodies of the
springs at the base should be flat between the two wheels.