TWS Bluetooth Earbuds User Manual FCC ID:2AHN6-AUBE217
Preface Thank you for purchasing this True Wireless Stereo Bluetooth Earbuds. This user manual will help you to use your Wireless Bluetooth Earbuds. Please understand and familiarize yourself with the Bluetooth function of your mobile phone before using it. Please charge your earbuds for more than 15 minutes for the first time to prevent the product from failing to work because of low battery. Specifications Bluetooth name: D01-ANC Bluetooth version: V5.
Mode of operation: Tap Bluetooth Receiving distance: 15M (Accessible Distance) Product size: 64.6*47.9*32.7 mm Standard accessories: Earbuds*2, Charging Case*1, Charging Cable*1, User Manual*1, Wing Tip*4 The above-mentioned parameters are subject to actual data. (I) Operation Instruction 1. Charging 1) Insert the earbuds into the charging case. For best results, do not insert earbuds in the charging case if they are wet or dirty.
While charging, the device and the charger may become hot. This does not affect the device’s lifespan or performance and is in the device’s normal range of operation. 2. Power on/off 1) Auto power on: Take the earbuds out of the charging case, there will be a voice prompt “Left/Right channel” first, then another voice prompt “Paring”. 2) Power on manually: When the earbud is powered off, long press the earbud for 3 seconds until you hear the voice prompt “Power on “.
“Connected” in your earbuds. Bluetooth Disconnection: 1) Disconnect with the earbuds on your smartphone. 2) Turn off Bluetooth on your smartphone. 3) Take earbuds away from your smartphone. There’s a voice prompt “Disconnect” in your earbuds when it’s disconnected with your smartphone. Auto Connection: After you pair the earbuds to your smartphone for the first time, the earbuds will pair your smartphone automatically once they’re taken out of charging case.
Single tap on R/L earbud Play a track. Pause a track. Answer or end a call. Double tap Play the next track by taping the left earbud. Play the previous track by taping the right earbud. Cancel the calling before the it's connected. Triple tap Volume up by taping the left earbuds. Volume down by taping the right earbuds. Tap 4 time on R/L earbud Active Siri Touch and hold R/L earbud for 2 seconds Cancel the calling before the it's connected.
(II) Safety Precautions Please read and follow these instructions: 1. Keep device away from extreme heat or humid. Extreme temperatures can cause the device to deform, reduce the battery capacity of the device, and shorten the life of the device. 2. Using time may be different depending on using habits. 3. Do not listen at high volume level for long period of time to protect your hearing. 4. Stop using this product immediately if it causes discomfort or pain. 5. Do not use the device in heavy rain.
(III) Warm Tips The Bluetooth working distance is about 15 meters. The earbuds have been through strictly quality testing when they leave the factory. The occasional signal jam is related to the surrounding environment. For example, there are many wireless signals in the surrounding environment, or there are obstructions blocking the signal, etc. It is recommended that you try another environment or location if signal jam happens.
and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐Reorient or relocate the receiving antenna. ‐‐Increase the separation between the equipment and receiver. ‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules.
