User's Manual

28
WIRELESS 7-IN-1 SENSOR
Dimensions (W x H x D) 322 x 296 x 217mm (12.7 x 11.7 x 8.5in)
Weight 674g (with batteries)
Main power
3 x AA size 1.5V batteries
( Lithium batteries recommended)
Weather data
Temperature, Humidity, Wind speed, Wind direction, Rainfall, UV
and light intensity
RF transmission range 150m
RF frequency (depend on
country version)
915Mhz (US) / 868Mhz (EU, UK) / 917Mhz (AU)
Transmission interval
- 12 seconds for UV, light intensity, wind speed and wind
direction data
- 24 seconds for temperature, humidity and rain data
Operating range -40 ~ 60°C (-40 ~ 140°F) Lithium batteries required
WIRELESS THERMO-HYGRO INDOOR SENSOR
Dimensions (W x H x D) 60 x 113 x 39.5mm (2.4 x 4.4 x 1.6in)
Weight 144g (with batteries)
Main power
2 x AA size 1.5V batteries
( Lithium batteries recommended)
Weather data Temperature and Humidity
RF transmission range 150m
RF frequency (depend on
country version)
915Mhz (US) / 868Mhz (EU, UK) / 917Mhz (AU)
Transmission interval 60 seconds for temperature and humidity
Operating range -40 ~ 60°C (-40 ~ 140°F) Lithium batteries required
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.