Owner's manual

C.B.S.  Scientific 12 Adjustable Height Sequencer

3.4 Methods for sealing glass plate sandwich - continued

(A) Gel Slider , ( B) Capillary Gel Casting or (C) Gel Sealing Tape

with gel sealing tape, as shown. Tape the sides first and then the bottom. Extend the tape

around the bottom corners in both directions to ensure an adequate seal. Apply the tape as

smoothly as possible to avoid forming air channels or bubbles along the edges of the glass

plates. Rub the tape firmly onto glass to eliminate air channels and ensure a liquid-tight

seal. To help prevent the glass plates from sliding apart while taping clamp one side and the

bottom of the sandwich with white spring clamps (Cat. # GPC-0002).