Instructions / Assembly

LED

L13

P11 C7

M18

M19

Li-Ion

14500-400MAH

3.2

SOFTTONE SMD

L15

See the pictorial signs on the enclosed users guide.

. Below is an explanation of the pictorial signs.

Follow the safety and assembly instructions carefully, and keep this manual in a safe place:

1. Read this manual carefully. If in doubt, consult the vendor.

2. Based on health and safety rules, you must not convert (CE), or make any changes to the

solar lights yourself. Should you ignore this the guarantee will be null and void.

3. Do not expose the product to extreme heat, extreme pressure, or other inappropiate use.

Should you ignore this again the guarantee will be null and void.

4. This product is not a toy, and is not be used as such by children.

Solar installation instructions:

A. Remove the plastic strip and move the switch to ON.

C. Assemble or place the solar lights without putting any pressure on the solar-panel or

other parts. Do NOT use a hammer!

D. Because of the built-in light sensor, the light will switch on automatically when it turns dark.

Place the light carefully in a proper position, for good use of the solar-sensor.

sunlight/daylight. Position the lamp with care, so that the battery can fully charge during the day.

F. Regularly clean the solar cells with water and mild detergent for a maximum storage of sunlight.

P9 This model contains 1x 3,2V Li-Ion battery of the type 14500. This light has a

P11 Under normal circumstances the light will burn for 6 hours after turning on power.

C7 Solar lighting is designed solely for outdoor use

C1 Safe around children and animals

C9 No connection to the electrical circuit required

L13 This light uses 1 or more LED’s as a light source. This combines a long life-time with low

power consumption. Solar LED’s are not interchangeable.

L15 This model contains softtone SMD-LED.

surfaces. Built in products must under no circumstances be covered by isolation material,

or any material of that sort.

M18 Please recycle packaging

M19 Please dispose of batteries in the correct way

Then Li-ION battery needs to be fully charged. Place the light in sucient (sun)light, for one or

more days.

max. 30LM light output

ASSEMBLY INSTRUCTIONS

PAGE 1
Follow the safety and assembly instructions carefully, and keep this manual in a safe place: 1. Read this manual carefully. If in doubt, consult the vendor. 2. Based on health and safety rules, you must not convert (CE), or make any changes to the solar lights yourself. Should you ignore this the guarantee will be null and void. 3. Do not expose the product to extreme heat, extreme pressure, or other inappropiate use. Should you ignore this again the guarantee will be null and void. 4.
PAGE 2
ON 1 OFF 2 3 4 Potting soil 3/4 filled with Pebbles or stones OPTION 1 OPTION 2 OPTION 3 Make sure to fill the planter as mentioned with pebbles/ stones, potting soil and plants so the post will stand stable on the edge of the planter.