Instructions / Assembly

Page 2 of (2)

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation.

ASSEMBLY INSTRUCTIONS:

STEP 3: Attach Wire Nut(H) to the wires.Tape Wirenuts and wires together.

STEP 4:Push connections and splices into Outlet box .

STEP 1: Separate the Mounting Plate(D) with unscrewing 4pcs Flat Head Screws(C)from fixture body(A).

STEP2:Pull the power supply wires from the Outlet Box ,and strip 3/4in. of insulation from wire ends of fixture

for each wire.Twist stripped ends of supply wires and fitter together with pliers,black to black(Live)

and white to white(neutral).Attach copper wire of fitter to the grounding wire of supply.

Helpful hint: if necessary,attach copper ground wire to grounded junction box.

STEP 5: Mount the Mounting Plate (D) to the Outlet Box by Mounting screws(G),and then

secure the 2 Tapping

crews(E) through the Mounting Plate to the wall as well as

fix the Anchor(F)to the wall together.

STEP 6: Place fixture body (A)over the Mounting Plate(D),Secure both togethe with 4pcs Flat Head Screws(C).

STEP7: Insert the Lens(B) into the support backets of light body properly.

MADE IN CHINA

Live

Black Wire

Wirenut

(H)

Neutral

White Wire

Copper

Outlet Box

(

Not included

)

Mounting Plate

(D)

Anchor

(F)

Flat Head Screw

(C)

Lens

(B)

Tapped Screw

(E)

Fixture Body(A)

Mounting Screw

(G)

Bend and push the 2 lens edges to

the corners of the support Bracket