Instructions / Assembly

INSTALLATION & ASSEMBLY
Remove the fixture and the mounting package from the box
and make sure that no parts are missing by referencing the
illustrations on the installation instructions.
1. Pull the power supply wires out from the outlet box (1). Attach
the mounting backplate(2) to the outlet box using two
mounting screws (3).
2.Make wire connections, connect the black supply wire (5) to
black fixture wire (11), white supply wire (4) to white fixture
wire(10) and the fixture ground wire(12) to supply ground
wire(6) using wire nuts (7).
Wrap all wire connections with electrical tape for secure
connection.
3.Place the pan base (11) of the lamp over the mounting
brackplat2 (2). Insert the fixture pan screws (12) and tighten to
secure the lamp to the ceiling.
4. Place Crystal (17) into holder (15) and secure with thumb
screws 1 (16).
5. Place Glass Shade (19) into Crystal (17) and secure with
thumb screws 2 (18).
6. Installation complete, restore power at the circuit breaker and
turn light switch on to activate this fixture
Care and maintenance – Use damp and clean cloth to wipe the
surface of the fixture.
Replacement- This LED product has no bulb to replace.
Turn off the main power at the circuit breaker before installing and
servicing the fixture to prevent possible injury from electric shock.
All electrical connections must be in accordance with local and
National Electrical Code (N.E.C.) standards. If you are unfamiliar with
proper electrical wiring connections, obtain the services of a qualified
electrician.
INSTALLATION INSTRUCTIONS
LED PENDANT FIXTURE 120VAC Input, Dimmable
READ AND FOLLOW SAFETY INFORMATION
1. OUTLET BOX (NOT INCLUDED)
2. MOUNTING SCREW
3. MOUNTING BRACKET
4. WIRE NUT
5. FIXTURE SCREW
6. BACK PLATE
7. CAP NUT