Shenzhen Core Technology Co. Ltd SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. C-2S _V 1.0 C-2S specification (WiFi &B LE module) product model：C-2S document number ：X ZX_RD_SP_C-2S V1.0 hardware version ：V 1.0 Revision No ：V 1.
Shenzhen Core Technology Co. Ltd C-2S _V 1.0 SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. Change record Change History： Version V1.0 Change record Revised content Page Initial development / Revision date 2020-08-19 Revision Wu Delong Contact information Web site: WWW.C-CHIP.COM.
Shenzhen Core Technology Co. Ltd SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. C-2S _V 1.0 Directory 1 2 3 4 5 6 7 8 Summary Summary................................................................................................................................................ 3 Basic characteristics Features.................................................................................................................................4 Application Application Field........................................
Shenzhen Core Technology Co. Ltd C-2S _V 1.0 SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. single chip scheme. ARM9 32-bit MCU kernel ,120 MHz main frequency, built-in 256 KBRAM. Supports 802.11 b/g/n WIFI standards. • Support 802.11 b/g/n standards • Station,Soft AP,Station+Soft AP support • Maximum transmission rate MHz 72.2 Mbps using 20 bandwidth Module built-in board antenna, external antenna optional Working voltage: DC 3.3-3.
Shenzhen Core Technology Co. Ltd C-2S _V 1.0 SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. 4 Box Module block diagram 5 P erformance P arameter of performance parameters 5.1 Module parameters Wireless standards Antenna Frequency range Module parameters WIFI 802.11b /g/n,1T1R PCB antenna Wireless network type 2.4G WIFI: 2412-2472 MHz (For EU) dBm IEEE802.11b <17 dBm IEEE802.11g <14 dBm IEEE802.
Shenzhen Core Technology Co. Ltd C-2S _V 1.0 SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. 5.2 Recommended working conditions Scope of operation Operating temperature range VCC I/O power (VDD_PIO) AIO input Frequency range Min -20 Typical - +3.1 3.1 0 2400 +3.3 +3.3 - Max +85 Unit °C +3.6 +3.6 +3.6 2484 V V V MHz 5.3 Maximum range Scope of operation Storage temperature V CC operating voltage I/O voltage Min Max -20 0 0 Unit +85 +3.6 +3.6 °C V V 5.
Shenzhen Core Technology Co. Ltd C-2S _V 1.0 SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. 5.5 R F parameters Parameters Working frequency Conditions Minimum 2412 - Typical values 17 14 13 6 - Maximum 2484 -90 -73 -71 -95 Unit MHz dBm dBm dBm dBm IEEE802.11b IEEE802.11g Transmission power IEEE802.11n BLE IEEE802.11b dBm dBm IEEE802.11g Sensitivity dBm IEEE802.11n dBm BLE All of the above test results are in 25°C room temperature 3.3 V power supply mode 5.
Shenzhen Core Technology Co. Ltd SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. C-2S _V 1.0 6 Module Size Chart and Foot Defining Mechanical Size and Pin Definition 6.1 Module Size Chart 6.2 Module Foot Bit Definition Chart 6.3 Pin Function Description Address: A3 Building, Shajing Donghuan Industrial Zone, Baoan District, Shenzhen, Tel :0755-29179480/81/82 Fax :0755-84736169 Company address: WWW.C-CHIP.COM.
Shenzhen Core Technology Co. Ltd SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. Address: A3 Building, Shajing Donghuan Industrial Zone, Baoan District, Shenzhen, Tel :0755-29179480/81/82 Fax :0755-84736169 Company address: WWW.C-CHIP.COM.CN C-2S _V 1.
Shenzhen Core Technology Co. Ltd SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. C-2S _V 1.0 7 Application Note for Note A. During the use of the module, please pay attention to avoid the influence of interference sources such as power amplifier, boost circuit and DC/DC circuit on the module, and avoid the module power supply circuit forming series circuit with high power circuit unit to reduce the interference B. If there are batteries, metal objects, LCD screens, horns, etc.
Shenzhen Core Technology Co. Ltd SHENZHENSHI XINZHONGXIN TECHNOLOGY CO.,LTD. C-2S _V 1.0 8 Reflow Temperature Profile recommended reflux temperature Key features of the profile： - Initial Ramp=1-2.
FCC regulatory compliance statement §15.19 Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. §15.21 Information to user Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
⚫ Antennas This module is tested with PCB antenna, and the Max. antenna gain is 0dBi. If you desire to increase antenna gain and either change antenna type or use same antenna type certified, a Class II permissive change application is required to be filed by us, or you (host manufacturer) can take responsibility through the change in FCC ID (new application) procedure followed by a Class II permissive change application.
⚫ Additional testing, Part 15 Subpart B disclaimer This modular transmitter is only FCC authorized for the specific rule parts listed on our grant, host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. Host manufacturer in any case shall ensure host product which is installed and operating with the module is in compliant with Part 15B requirements.
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
