User manual

C-COM Satellite Systems Inc. Page 18 of 128
iNetVu™ 7000 Controller User Manual
Revision 1.19
5. Installation
The iNetVu™ 7000 Controller is shipped pre-configured and calibrated with the iNetVu™
Mobile Platform and service which you plan to use. Only configuration of the Satellite
Modem / VSAT Communication parameters and the satellite you wish to find is required.
5.1. Rack Installation
The iNetVu™ 7000 Controller includes attachable “ears” which make the iNetVu™ 7000
Controller configurable for rack-mounted installation.
If you are installing the iNetVu™ 7000 Controller onto a rack, ensure that you use
supporting rails or a shelf to support the weight of the iNetVu™ 7000 Controller, and use
the provided “ears” to fasten the unit to the rack face.
5.2. Setup
1. Connect all of the cables and components as depicted by the previous section.
Select connections that are best suited for your application.
2. Power on the iNetVu™ 7000 Controller.
3. Set your external PC to the same subnet as the iNetVu™ 7000 Controller
(Default IP Address of the 7000 is 192.168.0.2)
4. Refer to the appropriate Service Manual for service based system configuration
via LCD or software, depending on the service used.