User manual

C-COM Satellite Systems Inc. Page 29 of 128
iNetVu™ 7000 Controller User Manual
Revision 1.19
4 – System Status (status meanings explained in the software section of this report)
AC Azimuth Calibration
AT ACP Testing
CC Compass Calibration
DT Dish Testing
EC Elevation Calibration
II Idle
LK Locked on Satellite
MM Manual Movement
PC Polarization Calibration
PK Peaking
PS Positioning
SG Stowing
SR Searching
ST Stowed
5 – Receive RF Signal
Receive RF Signal as measured from the LNB. The letter ‘U’ next to the RF Value indicates an
unlocked status, whereas the letter ‘L’ next to the RF value indicates a Locked on satellite status.
6 – GPS Status Flag and Compass Status Flag
The first letter represents the GPS status, and the second letter represents the Compass status
(i.e. VV, FF, OO, FO, OF, OV, VO).
V GPS/Compass Status is Valid/Normal
F GPS/Compass Status has failed
O GPS/Compass Coordinates have been overridden
7 – Modem Status
Displays the receive strength of the satellite, and the Modem/Transmitter Status.
D Transmitter Disabled
E Transmitter Enabled
U Unknown (Communication with Satellite Modem / VSAT has failed)
(E.g. M140D represents modem signal strength of 140, and transmitter is disabled)