User manual

C-COM Satellite Systems Inc. Page 75 of 128
iNetVu™ 7000 Controller User Manual
Revision 1.19
Enable/Disable ACP
Enables/Disables the ACP (Automatic Cross-Pol Testing), and M-ACP (Manual
Cross-Pol Testing)
Fig. 56: ACP Option Selection
To Enable ACP, select “AUTO” or “MANUAL” from the ACP drop down list and
click on the ‘Enable/Disable ACP’ Button to initiate.
To Stop ACP testing, select “STOP” from the ACP drop down list, and click on
the Enable/Disable ACP Button to initiate.
Deploy Antenna
Automatically moves antenna to the manually entered Elevation, Azimuth and
Polarization angles.
Fig. 57: Deploy Antenna Input Values
Enable/Disable Transmitter
Automatically Enables or Disables the Transmission process. Background will
turn red when transmitter is disabled, and green when the transmitter is enabled.