Operation Manual

CC WiFi 2 Page 24
Viewing System Information:
“System Information” will display
technical information about the radio,
including firmware versions, IP
information, current network name, and
MAC addresses.
Using AUX to connect a player:
Use the radio’s speaker to amplify audio from your portable player or
other device with AUX. From the home menu screen, rotate the DIAL
and select “AUX”.
Connect an 1/8 inch stereo patch cable (sold separately) between the
headphone jack (or line-out jack) of your device and the “Aux-In” jack of
the radio.
The volume is controlled by the radio and also by your device. It is best
to set the volume to medium on both to begin with. Use the controls on
your device to navigate and play audio.
Using Bluetooth® to connect a player
Send audio from your mobile phone or tablet to the radio via wireless
Bluetooth technology. Bluetooth usually has a range of about 20 feet
without obstructions. From the home menu screen, rotate the DIAL and
select “Bluetooth”.
Using the Information Center