Manual

CC SKYWAVE

Page 11

Radio Operation

WARNING! DO NOT ATTEMPT TO

CHARGE ALKALINE OR OTHER

NON-NiMH BATTERIES.

SEE PAGE 3 FOR MORE INFORMATION.

13. Alarm Button

With the radio powered o, press and

hold the ALARM button

for two seconds. While the hour is

ashing, press the or tuning

buttons (or rotate knob) until the hour

and AM/PM time is correct. Press the

ALARM button again to adjust the

minutes. When nished, press the

ALARM button again to conrm. To

disable alarm, press the ALARM button

for three seconds.

14. Activate 9 or 10 kHz Tuning Button – Expand FM Band

Many parts of the world, including Europe, use 9kHz tuning steps for the AM band.

10kHz tuning steps for AM are used in the USA and other regions. Switch tuning steps by

holding the 9/10kHz button for two seconds with the radio turned o. When tuning steps are

set to 9 kHz the FM Band will also be expanded to cover 76-108 MHz (Japanese FM Band.)

By default, the alarm will wake you with a “beep”. To wake to a radio station, press the

up-arrow tuning button during alarm setup. A speaker icon displays on the screen

indicating that the alarm will wake to the previous radio station played. It is best to check

the station frequency and adjust the volume level to your wake up preference before going

to sleep to insure that it is just how you want it. When the alarm sounds, press the power

button to turn the alarm o, or press any other button to sleep for 10 more minutes.