THE LEADING MANUFACTURER OF SMALL VALVES PRODUCT CATAL O G | VO L UM E 5 1
A HISTORY MADE IN THE USA The Leading Manufacturer of Small Valves INDUSTRY COMPLIANCE Access fittings manufactured and sold by C&D Valve meet ARI Standard 720-2002 and are manufactured and packaged in the USA. GUARANTEE C&D Valve products are unconditionally warranted against defective material and workmanship, and will perform to complete s atisfaction when used with our instructions.
CONTENTS Adapters/Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Automotive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Ball Valve Core Removal Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Blower Wheel Pullers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Brass Access Bodies . . . . . . . . . . . . .
TEKEDGE™ TEP-5D 2-STAGE DUAL VOLTAGE VACUUM PUMP INTRODUCING TM The TekEdge product line expands C&D’s solutions to the HVAC/R industry with a full range of products including: Refrigerant Charging Scale Refrigerant Gas Leak Detector Vacuum Pump Vacuum Pump Oil 2-stage dual voltage Integrated body structure Large sight glass Increased area for heat dissipation Low oil level Force feed oil design 1 year warranty For use with TekEdge Vacuum Pump Oil PART# TEP-5D REPLACEMENT PARTS PRP-001 PRP-002 PRP-003 PR
TEKEDGE™ TES-1 ELECTRONIC CHARGING SCALE Touch key controls Three display modes Compact design 110 lb. capacity Charging and recovery capabilities One 9v battery (included) Removable platform and control box with prop stand and hanging hook Durable case with integrated handle 1 year warranty PART# TES-1 Model Range Resolution Accuracy Power Supply Battery Life Temperature Weight Dimensions TES-1 0.0 lbs 0.0 oz to 110 lbs 0.0 oz 0.0 lbs to 110.0 lbs 0.0 kg to 55.0 kg Normal: 0.1 oz/0.005 lbs/2g Low: 0.
PREMIUM LINE SERVICE VALVES T-36 series PART# CD3434 PKG QTY: 6 3/16” copper tubing, 1/8”copper bushing, wrench cap and core PART# CD3436 PKG QTY: 6 1/4” copper tubing, 3/16”copper bushing, wrench cap and core GENERAL SPECIFICATIONS PART# CD3456 PKG QTY: 6 5/16” copper tubing, 1/4”copper bushing, wrench cap and core The T 36 Series comes with a CD2250 wrench cap, CD4460 valve core and is available in a variety of tube sizes. There are 1/8” male pipe threads below the hex.
STANDARD LINE SERVICE VALVES 36 LP Series PART# CD1010 PKG QTY: 6 1/8” copper tubing, wrench cap and core PART# CD1212 PKG QTY: 6 3/16” copper tubing, wrench cap and core PART# CD2525 PKG QTY: 6 1/4” copper tubing, wrench cap and core PART# CD3605 PKG QTY: 6 5/16” copper tubing, wrench cap and core PART# CD3606 PKG QTY: 6 3/8” copper tubing, wrench cap and core PART# CD3619 PKG QTY: 6 1/8” ID, 3/16”, 1/4”, 5/16” steps, wrench cap and core ECONOMY LINE SERVICE VALVES PART# CD8408 PKG QTY: 6 1/8”
BRASS ACCESS BODIES Standard Flare PART# CD1200 PKG QTY: 6 3/16” ID, 1/4”, 5/16” OD steps PART# CD9160 PKG QTY: 6 GENERAL SPECIFICATIONS C&D Valve manufactures brass bodies for a variety of special purposes. They are stock items and indicate the versatility of our parts. Most have the standard 1/4” male flare above the hex. Below the hex are various threads, outside diameters and inside diameters for accepting different sizes of tubing and connections. Many have multiple steps.
COPPER ACCESS TEES 84 TS Series PART# CD8426 PKG QTY: 2 PART# CD8414 PKG QTY: 2 For 1/4” copper tube PART# CD8434 PKG QTY: 2 3/8” x 3” tube, expanded to 3/8” ID on one end For 3/4” copper tube GENERAL SPECIFICATIONS PART# CD8416 PKG QTY: 2 PART# CD8427 PKG QTY: 2 For 5/16” copper tube 1/2” x 3” tube, expanded to 1/2” ID on one end PART# CD8478 PKG QTY: 2 For 7/8” copper tube PART# CD8438 PKG QTY: 2 For 3/8” copper tube PART# CD8428 PKG QTY: 1 PART# CD8420 PKG QTY: 2 5/8” x 3” tube, expanded to
BRAZE-ON SERVICE VALVES Copper-to-Copper M Series The M Series is the first and best braze-on, self-piercing copper saddle valve. It is widely used and e asily installed on a charged line. After brazing the saddle portion onto line, the steel pin with valve c ore penetrates the line and is locked into place simply by tightening the cap. Available in sizes r anging from 1/4” to 1-1/8”.
CLAMP-ON SERVICE VALVES B Series A line tap valve that is easy to use. Five individual sizes for special access jobs. Viton® gasket for heat extremes. 1. P lace aluminum channel on line. Insert aluminum slide into grooves on channel 2. Grip slide and channel with pliers. Place steel pin in body and screw into place PART# CD2140 PKG QTY: 2 For 1/4” lines PART# CD2160 PKG QTY: 2 For 5/16” lines PART# CD2380 PKG QTY: 2 For 3/8” lines 3.
BALL VALVE CORE REMOVAL TOOLS Ball Valve Core Removal Tool The original CRT has been improved with a ball valve design Two BV-CRT models from which to choose C ompact size for working in close quarters More durable with a stainless steel ball and brazed side fitting W orks with existing CRT accessories M ore convenient to use INSTRUCTIONS 1. Attach the tool to a 1/4” male flare fitting, thumb tight The BV-CRT works the same as our original CRT.
CORE REMOVAL TOOLS Core Removal Tools All accessory tools are compatible with CD3900, CD3910, CD3920, CD3930, and CD3956 TECH TIP PART# CD3090 PKG QTY: 1 Tube piercing attachment punches a hole in copper tubing througha V-Series fitting for the installation of a core without loss of refrigerant PART# CD5577 PKG QTY: 1 Valve core grappler and extractor – removes core without loss of refrigerant Have damaged threads or a broken valve core? Try our CRT thread chaser — available individually or as a kit.
CORE REMOVAL TOOL ACCESSORIES Thermometer PART# CD3975 PKG QTY: 1 • LCD read out • Swivel Head • On/off switch, hold test switch • Spare battery • Temperature range: -58°F (-50°C) to +302°F (150°C) BRAZE-IN SERVICE VALVES V Series Copper saddle valve for special use with CD3090 Tube Piercing Attachment and any core removal tool. Available to fit nine sizes of copper tubing.
SUPERHEAT KITS PART# CD3970 PKG QTY: 1 Combines CD3910 and CD3975 thermometer PART# CD3990 PKG QTY: 1 With CD3930 BV-CRT and CD3975 thermometer SERVICE KITS SUPERHEAT KITS Superheat KitS combine a Core Removal Tool (CRT) and thermometer to create the most reliable, accurate way to measure superheat. Attach the CRT to an access fitting and remove the valve core, insert the digital thermometer through the fitting and directly measure the internal temperature.
CORE DEPRESSORS SURE SEAL™ COUPLERS These thumbscrew core depressors are designed to be used on the end of a charging hose. When attached to an access fitting, they can depress the valve core and control the flow of gas. This also means the core can be shut off before disconnecting, thus avoiding a spit back on your hand. The seals in each part have broad compatibility with all refrigerants. The CD2070 is unique in that it has an internal shut-off that also holds gas in the hose when disconnected.
ADAPTERS/COUPLERS PART# CD1414 PKG QTY: 2 PART# CD2020 PKG QTY: 1 (CD2250 cap) 1/4” flare access x 1/4” MPT 1/4” female flare hex x 1/2” male Acme PART# CC1414 PKG QTY: 2 (CD2245 cap) PART# CD2022 PKG QTY: 1 3/8” female flare hex x 1/2” male Acme PART# CD1441 PKG QTY: 1 1/4” flare access x 1/4” flare, valve core and flare nut included (no cap) PART# CD2028 PKG QTY: 1 1/2” Acme female swivel x 1/4” male flare, depressor tip and seal PART# CD1818 PKG QTY: 6 (CD2250 cap) 1/4” flare access x 1/8” MPT
TEE CONNECTIONS PART# CD9601 PKG QTY: 2 PART# CD9621 PKG QTY: 2 PART# CD9602 PKG QTY: 2 PART# CD9622 PKG QTY: 2 PART# CD9603 PKG QTY: 2 PART# CD9623 PKG QTY: 2 1/4” male flare x 1/4” flare nut with depressor tip x 1/4” male flare on the branch with one valve core 1/4” male flare with valve core x 1/4” male flare x 1/4” female flare nut with depressor tip on the branch TEES All brass and copper tees come in several different configurations with regard to valve cores, caps and valve depressors.
OTHER CONNECTIONS PART# CD2613 PKG QTY: 1 PART# CD1446 PKG QTY: 1 Two 1/4” female connections with o-ring seals and 1/4” male flare (without core) at right angle for connecting needs PART# CD1450 PKG QTY: 2 PART# CD5044 PKG QTY: 1 1/4” female swivel flare x 1/4” female swivel flare—No depressor tips 1/4” male flare access x 1/4” female flare adapter, w ith one valve core a nd copper gasket On the branch is a 1/4” male flare, no core, and the other end a 1/4” female flare swivel with an o-ring sea
BLOWER WHEEL PULLERS A Professional Tool Fast and easy! A simple method to remove blower wheel from shaft without damage to blower, blower motor or shaft. PART# CD3505 PKG QTY: 1 1-1/4” hub only BLOWER WHEEL PULLER Unique hub design provides the perfect fit for most blower wheels allowing maximum torque for stubborn hard to remove wheels.
LOCKING CAPS AND KEYS Refrigerant Locking Cap Driver Your one tool to remove industry standard locking caps PART# CD3830 PKG QTY: 1 Cap Driver Replacement Bits PART# CD3831 | Red - Novent® PART# CD3832 | Green - Novent® PART# CD3833 | Silver - C&D - Shield® PUT SAFETY FIRST WITH REFRIGERANT LOCKING CAPS AND KEYS 3 bits for access t o C&D Valve, Novent and Shield® Cap* Magnetic tip securely holds bits in place Bits stored in handle for convenient a ccess and storage Compact design helps allow access i
OIL TAP PART# CD1808 PKG QTY: 1 The oil tap is installed on a semi-hermetic compressor for the changing o f oil and testing procedures. The internal pressure helps discharge the oil from the crankcase and acid tests can be made while the compressor is running. It allows the addition by vacuum or removal by pressure of oil while compressor is running. Detect hazardous refrigerant pooling in the crankcase before start-up and control the removal using a compound gauge.
CAPS/PARTS/O-RINGS/REPLACEMENT Caps PART# CD2210 PKG QTY: 25 PART# CD2235 PKG QTY: 6 PART# CD2214 PKG QTY: 6 PART# CD2245S PKG QTY: 6 PART# CD2215 PKG QTY: 6 PART# CD2245T PKG QTY: 24 1/4” Flare black glass-filled nylon cap 1/4” Flare heavy-duty hex brass cap with neoprene o-ring seal with neoprene o-ring seal 10 mm - 1.
INDEX 24 Part # Page CD0066 . . . . 23 CD0077 . . . . 23 CD0099 . . . . 23 CD0101 . . . . 23 CD0111 . . . . 23 CD0400 . . . . 23 CD0410 . . . . NS CD0500 . . . . 23 CD1010 . . . . . 7 CD1050 . . . . 23 CD1060 . . . . 23 CD1070 . . . . 23 CD1090 . . . . 23 CD1200 . . . . . 8 CD1212 . . . . . 7 CD1414 . . . . 17 CC1414 . . . . 17 CD1428 . . . . NS CD1438 . . . . NS CD1439 . . . . NS CD1440 . . . . NS CD1441 . . . .
TERMS & CONDITIONS/WARRANTY Orders Orders are subject to written acceptance by C&D Valve, LLC, and are subject to strikes, accidents, delays by suppliers, and other causes beyond our control. Receipt of an order will be understood as acceptance of these terms and conditions unless specific agreement to the contrary has been made in writing prior to order placement.
TERMS & CONDITIONS/WARRANTY Vacuum Pumps NOT CHANGING OIL WILL VOID WARRANTY C&D Valve, LLC vacuum pumps are warrantied to be free of defects in materials and workmanship for a period of one year from the date of purchase. This warranty applies to all repairable instruments that have not been tampered with or damaged through improper use including unauthorized opening of the unit. Pumps received within warranty period are assessed upon arrival at the C&D Valve facility to determine warranty coverage.
SALES REPRESENTATIVES WA ND MT OR ID NV NH ME VT MN SD WY UT CO AZ IL KS OK NM MI IA NE CA NY WI IN MO PA OH WV VA KY NC TN AR MI AL CT NJ DE MD MA RI SC GA LA TX AK FL HI Domestic SALES REP CONTACT SALES REP CONTACT CK Sales Jim Cunningham 732.239.1561 Vista Sales Katrina Shaffer 303.989.7636 Wright Sales Mike Brase 760.822.6395 Southwest Sales Group Scott Samuelson 602.723.7000 C&D Valve 800.654.9233 PED Associates Gil Ledoux 352.459.
C&D Valve is the leading manufacturer of refrigeration service valves, specializing in the design and manufacture of American made brass access fittings and tools to the HVAC/R industry. SINCE 1967 cdvalve.com Copyright 2018 C&D Valve, LLC P 800.654.9233 F 800.840.0443 sales@cdvalve.
