User's Manual
Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community,Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
5
2.5 LED Description
Indicator
Description
1
CATV
CATV status
On:CATV optical normal
Off:The CATV signals are not received
2
WIFI
WIFI
Blinking:Data is being transmitted
On:Wi-Fi function Opens
3
FE
FE port status
On: Ethernet connection is normal
Blinking: Data is being transmitted through the
Ethernet port
Off: Ethernet connection is not set up
4
GE
GE port status
On: Ethernet connection is normal
Blinking: Data is being transmitted through the
Ethernet port
Off: Ethernet connection is not set up
5
LOS
GPON optical signals
On: Optical power lower than receiver sensitivity ;
Off: Optical in normal
6
PON
ONU Register
On: Success to register to OLT
Blinking: In process of registering to OLT
Off: Failed to register to OLT;
7
PWR
Power status
On: The ONU is power on
Off: The ONU is Power off
2.6 Device Connection
⚫ Connect the fiber: Insert the SC fiber connector into the PON connector on the rear panel
of the ONU.
⚫ Connect the Ethernet cable: Connect the RJ-45 Ethernet cable to any LAN port and each
home device, that is, the computer, IPTV set-top box, and so on.
⚫ Connect coaxial cable: Connect the coaxial cable to the RF connector of the ONU.
⚫ Connect the AC adapter: Plug the AC / DC adapter into the AC wall jack and the ONU
12V DC power jack.