Specifications

C-giant rel 3.07. Sales by Jemba, Sweden. Tel [phone]
C-giant Page 13
If CAL is used when FUEL is selected a sequence is started that will calibrate the
FUEL function. See page 22. Flash text (.CALib.) and led indicator show that the
function is selected.
Selectable keys: SET, numeric keys, RESET.
RESETOPTION
CAL
SPLIT
89
HALT
7
BREAK
ADD
0
PILOT
6
FUEL
5
TIME
4
TRIP1 TRIP2
12
SPEED
3
SET
by Coralba Sweden
.
.
.
-giant
4.2.10. BREAK
BREAK will reset the instrument to a defined status. This function must not be used as
a normal resume function but as an emergency action if you must abort a started
sequence. It is also used to start the instrument if a power failure has hang up the
instrument. This may happen if power is intermittent.
4.2.11. ADD/-
Reverse counting direction (-). Flash text (.nEG.dir) and led indicator shows that the
function is selected. NOTE! This function influences only the register that is currently
shown in the display. This function may be used together with TRIP l, TRIP 2, TRIP
3, SET, TIME, PILOT.
If 'FUEL' is selected this key allows you to view the fuel values for the past 99 km's in
1 km increments by repeatedly pressing '-'. See page 19
In SET mode '-' will be interpreted as a minus sign if it is the first key after 'SET'
otherwise it is interpreted as 'ADD'. See pages 18 and 18.
4.2.12. HALT
HALT will stop the current register from counting. This function is also used to add
several intervals. Flash text (..HALt.) and led indicator shows that the function is
selected.
This function may be used together with TRIP l, TRIP 2, TRIP 3, SET, TIME, PILOT.
4.2.13. POSITIVE (+)
POSITIVE counting direction (+). Flash text (.PoS.dir) and led indicator shows that
the function is selected. This function may be used together with TRIP l, TRIP 2,
TRIP 3, SET, TIME, PILOT.
This key is also used to view the fuel values for the past 99 km's in 1 km increments.
See page 19.