Instruction Manual

158 PUL-SI
Vishay BCcomponents
Aluminum Capacitors
Power Ultra Long Life Snap-In
www.vishay.com For technical questions, contact: [e-mail]
Document Number: 28375
98 Revision: 07-Oct-09
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
(quick reference)
REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 60384-4/
EN130300
subclause 4.13
T
amb
= 105 °C; U
R
applied;
2000 hours
ΔC/C: ± 15 %
ESR ≤ 1.3 x spec. limit
Z ≤ 2xspec. limit
I
L5
≤ spec. limit
Useful life CECC 30301
subclause 1.8.1
T
amb
= 105 °C; U
R
and I
R
applied;
5000 hours
ΔC/C: ± 20 %
ESR ≤ 3 x spec. limit
Z ≤ 3xspec. limit
I
L5
≤ spec. limit
no short or open circuit,
no visible damage
total failure percentage:
U
R
: ≤ 1 %
Shelf life
(storage at
high temperature)
IEC 60384-4/
EN130300
subclause 4.17
T
amb
= 105 °C; no voltage applied;
500 hours
After test: U
R
to be applied for 30 minutes,
24 hours to 48 hours before measurement
ΔC/C: ± 15 %
ESR ≤ 1.5 x spec. limit
I
L5
≤ 2 x spec. limit