User Manual

Document Number: 94378 For technical questions, contact: [e-mail]
www.vishay.com
Revision: 30-Apr-08 3
ST733CLPbF Series
Inverter Grade Thyristors
(Hockey PUK Version), 940 A
Vishay High Power Products
SWITCHING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum non-repetitive rate of
rise of turned-on current
dI/dt
T
J
= T
J
maximum, V
DRM
= Rated V
DRM
, I
TM
= 2 x dI/dt
Gate pulse: 20 V 20 Ω, 10 µs 0.5 µs rise time
1000 A/µs
Typical delay time t
d
T
J
= 25 °C, V
DM
= Rated V
DRM
, I
TM
= 50 A DC, t
p
= 1 µs
Resistive load, gate pulse: 10 V, 5 Ω source
1.5
µs
Maximum turn-off time
minimum
t
q
T
J
= T
J
maximum,
I
TM
= 550 A, commutating dI/dt = 40 A/µs
V
R
= 50 V, t
p
= 500 µs, dV/dt: see table in device code
10
maximum 20
BLOCKING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum critical rate of rise of off-state voltage dV/dt
T
J
= T
J
maximum, linear to 80 % V
DRM
,
higher value available on request
500 V/µs
Maximum peak reverse and off-state leakage current
I
RRM
,
I
DRM
T
J
= T
J
maximum, rated V
DRM
/V
RRM
applied 75 mA
TRIGGERING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum peak gate power P
GM
T
J
= T
J
maximum, f = 50 Hz, d% = 50
60
W
Maximum average gate power P
G(AV)
10
Maximum peak positive gate current I
GM
T
J
= T
J
maximum, t
p
≤ 5 ms
10 A
Maximum peak positive gate voltage + V
GM
20
V
Maximum peak negative gate voltage - V
GM
5
Maximum DC gate current required to trigger I
GT
T
J
= 25 °C, V
A
= 12 V, R
a
= 6 Ω
200 mA
Maximum DC gate voltage required to trigger V
GT
3V
Maximum DC gate current not to trigger I
GD
T
J
= T
J
maximum, rated V
DRM
applied
20 mA
Maximum DC gate voltage not to trigger V
GD
0.25 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum operating junction temperature range T
J
- 40 to 125
°C
Maximum storage temperature range T
Stg
- 40 to 150
Maximum thermal resistance, junction to heatsink R
thJ-hs
DC operation single side cooled 0.073
K/W
DC operation double side cooled 0.031
Maximum thermal resistance, case to heatsink R
thC-hs
DC operation single side cooled 0.011
DC operation double side cooled 0.005
Mounting force, ± 10 %
14 700
(1500)
N
(kg)
Approximate weight 255 g
Case style See dimensions - link at the end of datasheet TO-200AC (B-PUK)