PRODUCT SPECIFICATION Brand Product Range Catalogue number Date C.
6216 6215A (Euro plug) glue gun complete with 12x200mm glue sticks in a storage/carrying case 6216 6218 All purpose glue sticks 100mm long Packs of 6 or 25 6218 6219 All purpose glue sticks 200mm long Packs of 25 or 125 6219 5013969027808 Commodity code 82055990 Carton Qty 6 Glue Gun 80w Euro Plug 5013969027815 82055990 6 T6216 Glue Gun Kit 80w Euro Plug 5013969978971 82055990 1 T6218 06 All purpose Glue sticks 100mm Pack of 6 5013969031416 35061000 6 T6218 25 All Pu
Technical product information Standards compliance Glue melt temperature – 120 degrees Centigrade Maximum heater element temperature – 193 degrees Centigrade None applicable User health and safety information RoHS/WEEE compliance Material safety data Warranty None applicable Country of origin These products are fully WEEE and RoHS compliant See appendix 1 C.
Packaging waste details Primary Packaging Item Secondary packaging Plastic g Use Card g T6215 35 Blister 10 T6215A 35 Blister 10 T6216 5 Cover 30 Use Card g Use 326 Box 326 Box Sleeve - - 70 Box Backing card Backing card Plastic g Use T6218 06 8 Blister 10 Backing card T6218 25 4 Bag - - 77 Box T6219 025 8 Bag - - - - T6219 125 12 Bag - - - - Copyright Carl Kammerling International Ltd
Appendix 1 1. Identification of the substance / preparation and of the company Product: T6218 Glue Sticks Manufacturer: Carl Kammerling International Ltd C.K House, Pwllheli. LL53 5LH Tel: +44 (0) 1758 701070 Fax: +44 (0) 1758 704777 Emergency Tel: +44 (0) 1758 701070 Type : Hotmelt based on EVA-copolymer. Intended use: Hotmelt Adhesive. 2.
Hazardous Combustion Products : carbon dioxide, carbon monoxide 6. Accidental release measures: See protective measures listed in section 8. In case of spills allow to cool and sweep up. Hold waste for disposal according to local regulations (see section 13). 7. Handling and storage: Handling: Avoid skin and eye contact with melted product. Avoid inhalation of warm gases. For personal protection see section 8. Storage: Store product in tightly closed container in a dry place.
11.Toxicological information: Properties injurious to health: Gases formed at high temperatures may irritate the eyes and the respiratory tract. 12.Ecological information: Do not release product into the environment or the drains. 13.Disposal considerations: The product should be disposed of in accordance with national or local regulations. 14.Transport information: The product is not classified as dangerous for carriage. 15.
Intended use: Hotmelt Adhesive. 5. Composition/information on ingredients: EVA-copolymer / Synthetic resin / Wax and Stabilizer The product does not contain any substances presenting a health hazard within the meaning of the Danish and EC regulations. 6. Hazards identification: Gases formed at high temperatures may irritate the eyes and the respiratory tract. As a liquid, the material may cause serious burns. 4. First aid measures: General: In all cases of doubt, seek medical attention.
Avoid skin and eye contact with melted product. Avoid inhalation of warm gases. For personal protection see section 8. Storage: Store product in tightly closed container in a dry place. Keep out of the reach of children. 14. Exposure controls / personal protection: Technical facility design: provide adequate ventilation. Preferably use an extractor hood over the location used for the melted product. Personal protection: Respiratory protective equipment: Avoid breathing warm gases.
The product should be disposed of in accordance with national or local regulations. 14.Transport information: The product is not classified as dangerous for carriage. 15.Regulatory information: This product has been classified in accordance with Danish and EC Directives on Hazardous Materials. Hazard symbol: The product is not classified as dangerous. No classification and labeling. Application restrictions: 16.