Specifications

Chapter 8 Commands 133
▲ IMPORTANT: There are a two prerequisites for this command to work:
• The computer must be configured to “Wake on LAN” (sometimes referred
to as “Magic Packet”). This setting may be found under the “Power
Management” tab of the Local Area Network Connection’s Properties
dialog box, or in the computer’s BIOS settings.
• The production computer must at some point have given the Power Down
command to that display computer, allowing it to learn the computers
network card hardware address.
Tier Manages stage tiers, which are useful for building elaborate display arrange-
ments (see “Using Stage Tiers for Complex Display Arrangements” on page
98).
Main Selects the main stage tier. There’s always at least one stage tier. Any addi-
tional stage tiers will be listed below “Main” on this sub-menu.
◆ NOTE: In order to add or manipulate displays, you must first select their
stage tier using this menu. Inaccessible displays are shown with a dotted
outline in the Stage window, and a small text will appear when you point
at such a display, telling you which tier it resides on.
Add Adds another tier to the stage, and selects it as the current tier. Any displays
you add or paste will now go onto this tier.
Rename Allows you to change the name of the currently selected stage tier.