User Manual

Product: Porch Rocker (C05)
Your purchase and who is C. R. Plastic Products Inc.?
C. R. Plastic Products Inc. is an environmentally conscious Canadian company. Our "Generation line"
of recycled plastic furniture will give you years of comfort, style, and maintenance free enjoyment.
You will find your furniture to be waterproof and durable. By choosing this product you are saving
generations of trees and reducing the burden on our landfill sites. Thank you for purchasing from
C. R. Plastic Products Inc.
Parts: You will need
1. Legs (A) 1. Drill
2. Seat (B)
3. Back (C)
4. Two Stringers (D)
5. Bag of screws (24 - 2½” and four - 1¼”)
1a) 1b)
2
3)
3a)
3b)
Step 2: Take one of the stringers (D) and place it between the two
back legs. Line it up with the remaining counter sunk holes and
attach using 2½” screws.
Attach the remaining stringer between the two front legs using the
same method.
2. #2 Robertson or
Philips screw driver
Step 1: a) Take the seat (B) and place it on its side with the seat
slats towards you and the round edge on the right. Take the Left
leg (A) and line up the counter sunk holes with the pilot marks on
the seat. Attach the leg to the seat using 2½” screws.
b) Flip the seat over and repeat on the other side.
Step 3: a) Take the back (C) and place it flush with the back of the
seat. Fit the back into the notches in the back of the arms.
First Attach the bottom of the back (C) from underneath the seat
using four 1¼” screws.
b) Use the countersunk holes in the top of the leg to attach the
sides of the back to the legs with 2½” screws.
Proudly Made In CANADA

Summary of content (1 pages)