Manual

PARTS:
8- 1 1/2"
YOU WILL NEED:
1. Drill with Robertson or Phillips bit
STEP 1:
STEP 2:
STEP 3:
C13 SWIVEL DOES NOT COME WITH A FOOT REST ATTACHED AS SEEN IN PHOTOS
IMPORTANT:
Align the Swivel Base ( B ) in the notched out section of the seat braces. Rotate the
swivel so all 8 countersunk holes are visable and secure the base to the seat using 8x
1 1/2" screws.
C22 SWIVEL PUB CHAIR
Carefully flip the entire chair on its feet and enjoy!
C13 SWIVEL DINING CHAIR
Place Seat Assembly ( A ) upsidedown, resting on the arms, allowing the back to hang
down so seat is sitting flat.
B. Swivel Base
A. Seat Assembly
C. Bag of screws
C. R. Plastic Products Inc. • 1-533 Romeo Street South, Stratford, ON N5A 4V3
Toll Free: 800-490-1283 • Fax: [phone] • www.crpproducts.com