Operating instructions

16
Diagram 12 continued
How to use diagrams 10,11 and 12:
If you wished to avoid detecting ring pulls and small ferrous objects (e.g. nails) then you
would set the NOTCH at 4 and the DISC control at 2.
The effect would be:
Ring pulls - no sound
Nails -
no sound
5p/milk bottle top -
high
volume
£1 coin etc. -
high
volume
Note: Take care not to
inadvertently
leave the NOTCH in
the ACCEPT
position as the detector,
when in MOTION, will
detect only over the
small range within the
NAIL SMALL MILK 5p COIN RING PULL £1 COIN
HORSESHOE BOTTLE TOP
DETECTED
NO
SOUND
10
8
6
4
2
DISC
SETTING
ACCEPT
NO
SOUND
NAIL SMALL MILK 5p COIN RING PULL £1 COIN
HORSESHOE BOTTLE TOP
NOTCH SETTING
OFF
2
4
Although the CS4ZX is manufactured to the highest specification, slight variations
can occur in all electronic equipment. This chart, therefore is intended as a guide
only and precise setting for maximum performance will be achieved by constant
practice.