Operating instructions

FEATURES

• Computerised control system

• SST intelligent ground tracking

• Smart Scan panel array

• High speed target analyser

• Target Pin-point

• Depth reading

• Overdrive large target indication

• Anti dust & moisture features

• Comfortable balance

• 8 inch diameter, lightweight search head

• 12.5KHz operating Frequency

• Headphone jack

SmartScan system: Analysis and adjustment occurs hundreds of times per second assuring

optimum performance under any ground conditions.

INTRODUCTION

To protect your investment complete both sections of the enclosed guarantee card and return

to C-Scope. This is particularly important in order to obtain the free second year parts

guarantee. Please retain the original packing box. In the event that your detector should ever

require to be serviced, this package will be most suitable for postal protection.

C-Scope detectors are recognised as the finest detectors available. They are designed with

lasting quality, high technology, and above all, value for money. The only way to realise this

value is to carefully study and understand this instruction manual. You will then be able to

obtain all the advantages designed into your detector. It is also strongly recommended that

you experiment with the detector's operation in air using various test samples, in order to

learn to identify and understand the detector's capabilities and responses. Always remember

that becoming a good metal detectorist is like becoming a good photographer or fisherman,

that is, although it is an advantage to buy the best equipment, having bought it, patience and

hours of practice are needed to become proficient.

ASSEMBLY

Open the carton and remove the main housing assembly. Twist the plastic stem lock, located

at the end of the upper stem to allow the lower stem to be inserted. Adjust for length and

rotate the lower stem to wrap the cable around the stems and take up any slack. Allowing

enough cable for free movement of the search head push the cable into the cable slots to hold

it firm. Turn the stem lock to fix it at the desired position.