Call Systems

Declaration of Performance • Approved Document No. DOP0000005 R1 • Page 2 of 3

has performed type testing and the initial inspection of the manufacturing plant and of factory

production control with continuous surveillance, assessment and approval of the factory

production control under system 1 and issued following certificate of constancy of

performance:

0359-CPD-0183

8. In case of the declaration of performance concerning a construction product for which a

European Technical Assessment has been issued:

Not applicable, see item 7

9(a). Declared performance applicable to models C4403AIR, C4403A2, C4403B and C4416:

All requirements including all Essential Characteristics and the corresponding performances for the

intended use or uses indicated in 3. above have been determined as described in the hEN mentioned

in the following table.

Essential characteristics

Performance

Clauses in EN54-

5:2000 + A1:2002

Notes

Nominal activation

conditions/Sensitivity, Response delay

(response time) and Performance

under fire conditions

Pass

4.2, 4.3, 5.2 to 5.6,

5.8, 6.1, 6.2

6.2 applies to

C4403A1R only

Operational reliability

Pass

4.4 to 4.11

Tolerance of supply voltage

Pass

5.7