0/100Base-TX to 100Base-TX Media Converter Operation Manual
COPYRIGHT All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photo copying, recording or otherwise, without the prior written permission of the publisher. FCC WARNING This equipment has been tested and found to comply with the limits for class A device, pursuant to part 15 of FCC rules.
Table of Contents 1 Introduction ............................................................ 1 About This Guide .................................................... 1 Welcome................................................................. 1 Purpose .................................................................. 1 Terms/Usage .......................................................... 1 Features.................................................................. 2 Specifications............................
Application Diagram II...........................................19 Application Diagram III..........................................
10/100Base-TX to 100Base-FX Mini Converter 1 Introduction About This Guide Welcome Thank you for choosing the 10/100Base-TX to 100Base-FX Mini Media Converter. This device integrates copper and multi-mode/single mode fiber networks in one flexible package. Purpose This guide discusses how to setup and install your 10/100Base-TX to 100Base-FX Mini Media Converter.
10/100Base-TX to 100Base-FX Mini Converter Features • • • • • • • • Automatic MDI/MDI-X selection on RJ-45 port Store-and -forward at full wire speed Auto-negotiation, NWay support Extends distance of up to 2km (6600 feet) multimode fiber and 120km (396000 feet) long-haul single mode fiber Compatible with other 10Base-T & 100Base-TX /FX devices LEDs for at-a-glance device status Compact design, cost effective and space saving FCC Class A & CE approved -2-
10/100Base-TX to 100Base-FX Mini Converter Specifications Standard: IEEE 802.3 (10BASE-T Ethernet), IEEE 802.3u (100BASE-TX/FX Fast Ethernet) Connector: 1x duplex fiber optic connector: ST / SC types or simplex fiber optic connector: WDM single fiber type 1x UTP 100/120ohm; RJ-45 type Max. Distance: UTP: 100m Cat 3/4/5 Fiber Optic: 2km MM, dual fiber 120km Long-haul SM, dual fiber Power: External power supply: 5V DC @ 0.
10/100Base-TX to 100Base-FX Mini Converter Emissions: Dimensions: FCC Part 15 of Class A & CE approved 86.2 x 59.4 x 23.
10/100Base-TX to 100Base-FX Mini Converter 2 Hardware Description Product Overview The Converter offers the most comprehensive network extension and monitoring status. It is designed for large workgroups who demand higher speed and wider bandwidth. It allows migration and expansion from a copper-based Ethernet to a fiber optic Fast Ethernet. It features automatic MDI detection setting. This function allows for simple direct connection to a workstation, switch or hub.
/100Base-TX to 100Base-FX Mini Converter kilometers for long-haul single mode fiber between a LAN switch, file server or another networking device.
10/100Base-TX to 100Base-FX Mini Converter Copper Port View Power LED Indicators Fiber Port View Fiber Transceiver -7- Copper Port
10/100Base-TX to 100Base-FX Mini Converter 3 Installation To install your Converter, please see the following procedures: • Location • Install the Converter Location The location selected to install the Converter may greatly affect its performance. When selecting a site, we recommend considering the following rules: • Install the Converter in a fairly cool and dry place. See Technical Specifications for the acceptable temperature and humidity operating ranges.
10/100Base-TX to 100Base-FX Mini Converter 10/100BASE-TX Port The 10/100BASE-TX port supports network speeds of either 10Mbps or 100Mbps, and can operate in halfand full duplex transfer modes. This port also offers automatic MDI/MDI-X crossover detection that gives true "plug and play" capability - just plug-in the network cable to the port and the port will adjust according to end node device automatically. The RJ45 connector is suitable for UTP cable Category 3, 4, 5 or better.
10/100Base-TX to 100Base-FX Mini Converter 2. Affix the four (4) self-adhesive rubber pads to the underside of the Converter. 3. Apply AC power to the Converter. (The green PWR LED should be lit). 4. Connect cables from the network partner devices to the ports on the front panel. (The green LNK LED on the front panel associated with the port should be lit). Warning Please exercise caution when using power tools.
10/100Base-TX to 100Base-FX Mini Converter Getting Connected Powering On Unit The Converter uses an AC power supply 100~240V AC, 50~60 Hz. The Converter's power supply automatically self-adjusts to the local power source and may be powered on without having any or all LAN segment cables connected. 1. Insert the power cable plug directly into the receptacle located at the back of the device. 2. Plug the power adapter into an available socket.
10/100Base-TX to 100Base-FX Mini Converter Connecting Fiber Cable When connecting fiber cable to a 100BASE-FX port on the Converter, be sure the correct type - ST or SC or WDM - connector is used. Follow the steps below to properly connect fiber cable: 1. Remove and keep the ST/SC/WDM port's rubber cover. When not connected to a fiber cable, the rubber cover should be replaced to protect the optics. 2. Check that the fiber terminators are clean.
10/100Base-TX to 100Base-FX Mini Converter Connecting Copper Cable The 10/100BASE-TX RJ-45 Ethernet port fully supports auto-sensing and auto-negotiation. 1. Insert one end of a Category 3/4/5/5e type twisted pair cable into an available RJ-45 port on the Converter and the other end into the port of the network node. 2. Check the corresponding port LED on the Converter to be sure that the connection is valid.
10/100Base-TX to 100Base-FX Mini Converter 4 LED Indicators This Converter has LED indicators located at the copper port side of the device. The LEDs have been designed to give easy at-a-glance network status, and provides ‘real-time’ connectivity information.
10/100Base-TX to 100Base-FX Mini Converter Port LEDs Condition LED Status Illuminated when On (Green) connectors are attached LNK/ACT (Copper) Data traffic Flashing (Green) passing through port No valid link Off established on port Illuminated when On (Green) connectors are attached LNK/ACT (Fiber) Data traffic Flashing (Green) passing through port No valid link Off established on port - 15 -
10/100Base-TX to 100Base-FX Mini Converter Appendix A Cables The following are some recommendations as to what you should and should not do when installing cables. Remember - cables are the deciding factor in network performs 24m 6mm m Try to maintain a bend rad ius of (min.) 4x the diameter of the cable for UTP and 100x for fiber. Place cable ties at regular intervals - do not over tighten cable ties - try to avoid using with fiber.
10/100Base-TX to 100Base-FX Mini Converter Appendix B About RJ-45 Cables When connecting your network devices, use standard Category 3 eight-way cables for 10Base-T configurations and Category 5 cable for 100Base-TX.
10/100Base-TX to 100Base-FX Mini Converter Appendix C Application Diagrams To effectively expanding a Fast Ethernet network, position two converters back-to-back as illustrated. Application Diagram I In the figure below, the Converter is functioning as a high-speed bridge between switches creating increased capacity for each user (node) on the local area network. It is providing a 100Mbps full duplex link to a variety of Fast Ethernet network devices within a LAN.
10/100Base-TX to 100Base-FX Mini Converter Application Diagram II In the figure below, the Converter is functioning as a server aggregation for an enterprise or LAN configuration. It is providing a 100Mbps full duplex link to a workgroups of 10/100 switches located on separate floors within a single building. Switch ↔ CONVERTER ↔ CONVERTER ↔ Server Application Diagram III In the figure below, the Converter is functioning as a high-speed dedicated link within a campus network configuration.
10/100Base-TX to 100Base-FX Mini Converter - 20 -
