Multi-Modular Cable Tester User Manual Model: 250451 Hobbes Computer Network Accessories www.hobbes-usa.
MULTI-MODULAR CABLE TESTER Test for USOC 4/USOC 6/USOC 8 Modular Cable 1. 1 Plug one end to the master tester and the other end to the remote terminator (you may plug both end to master unit only, if you are not doing a re-mote test). 2. Push the power switch on, the power LED will flash to show the power is working properly. 3. As soon as the tested cable is inserted the LEDs on the remote terminator will start to scan one by one. 4.
