USB SuperBooster Transmitter Wall Plate Part #29344 User Manual
Introduction Thank you for purchasing the USB SuperBooster Transmitter Wall Plate. The USB SuperBooster Transmitter Wall Plate is one component of a complete solution that, when paired with a receiver (sold separately) allows you to conquer USB length limitations and put your USB devices where you need them.
Features • • • • • • • • • • • Extends the distance of a USB device from a USB-enabled computer up to 150ft One part of a total solution- receiver is purchased separately giving you the flexibility to customize the configuration to your specific needs Receiver options include a 2-port wall plate (part #29345), a 2-port dongle (part # 29346), or a 4-port dongle (part #29347) Ideal for use with USB projectors, interactive whiteboards, cameras, printers, web cams, hubs, and other USB devices Fits a standard J
Installing your USB SuperBooster Wall Plate The USB SuperBooster Wall Plate has a transmitter unit and a receiver unit (sold separately). Make certain you install the transmitter unit at your computer or source side. The receiver unit needs to be installed on the device side.
Termination Chart Pin Number 1 2 3 4 5 6 7 8 Network (Cat5/5E/6) Conductor Color white/orange orange White/green Blue White/blue Green White/brown brown Application Diagram Transmitter Receiver 3555 Kettering Blvd. Moraine, Ohio 45439 1-800-293-4970 www.cablestogo.
