Owner manual

BATTERY LIFE
Low Battery - When the battery is below the level
required for the LanMaster 30 to operate properly, the
“SIGNAL” indicator blinks on and off while a test is being
conducted.
APPLICATIONS
Moves, Adds and Changes - Reduce risk of equipment
damage by identifying correct outlet for connecting
telephone and network devices.
Installation - Verify physical layer connectivity to the far-
end equipment.
Trouble Calls - Reduce troubleshooting time by
ensuring the connection is correct and outlet is
functional. Prevent damage to sensitive test equipment
by identifying outlet type before running tests.
Telecom System Management - Locate expensive
unused analog phone circuits for reassignment or
termination.
Network Management - Identify Ethernet Link data rate
(10Mbps or 100Mbps) and support for auto-negotiation.
ETHERNET LINK SIGNAL OVERVIEW
Three different signals can be used to establish an
Ethernet Link: a Link Code Word, an NLP or an MLT-3
waveform. The Link Code Word is specific in both Link
speed and duplex mode. The NLP is specific in speed
(10Mbps) but ambiguous in duplex mode (half or full).
The MLT-3 waveform is also specific in speed
(100Mbps) but ambiguous in duplex mode. Duplex
modes for equipment that use NLP or MLT-3 signaling
must be carefully managed to ensure proper Link
operation.
WARRANTY
Psiber Data Systems Inc. warrants that the product shall be free from defects in
parts or workmanship for a period of 12 months from the date of purchase if used in
accordance with Psiber Data Systems Inc. operating specifications.
THIS IS THE ONLY WARRANTY MADE BY Psiber Data Systems Inc. AND
IS EXPRESSLY MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Should any parts or workmanship prove defective, Psiber Data Systems Inc. will
repair or replace at Psiber Data Systems’ option, at no cost to the Buyer except for
shipping costs from the Buyer’s location to Psiber Data Systems Inc. This is Buyer’s
SOLE AND EXCLUSIVE REMEDY under this Agreement. This warranty does not apply
to products which have been subject to neglect, accident or improper use, or to units
which have been altered or repaired by other than an authorized repair facility.
Return of Equipment - To return a product to Psiber Data Systems Inc., first
obtain a Return Authorization number from our Customer Service by calling 619-287-
9970. The RA# must be clearly marked on the shipping label, or the package will not be
accepted by Psiber Data Systems Inc. See sample label below.
To: Psiber Data Sytems Inc.
7075-K Mission Gorge Road
San Diego, CA 92120
RA# XXXXXXXX
LanMaster, psiber and the Psiber logo are trademarks of Psiber Data
Systems Inc. Copyright 1999 Psiber Data Systems Inc. All rights reserved.
Part No. 1005-0300-0000 Rev B
LL
LL
L
ANAN
ANAN
AN
MM
MM
M
ASTERASTER
ASTERASTER
ASTER
30 30
30 30
30
USER’S GUIDE