Manual

1
USB 2.0 3.25” Internal Hub- 4-Port
USER’S MANUAL
I.
The Cables To Go USB 2.0 High-Speed Front-Bay Hub has 4 ports that will connect to either
USB 2.0 High-Speed or USB 1.1 peripheral devices. The internal USB hub can be mounted into
any 3.5 inch drive bay allowing for hassle free front-side connection of USB devices. With four
downstream ports, it is designed to work with mice, keyboards, CD-R/RW's, hard drives,
webcams, flash card readers and other USB enabled devices. The USB 2.0 High-Speed
Front-Bay Hub can transfer data at 480 Megabits per second, making it 40 times faster than
previous USB adapters and 20% faster than FireWire. The plug and play design makes for easy,
trouble-free installation of your USB devices.
Introduction
II.
Compliant with Universal Serial Bus Specification Revision 2.0
Features
All downstream facing ports can handle high-speed (480Mbps), full-speed (12Mbps),
and low-speed (1.5Mbps) transaction
Support Plug & Play and Hot Swappable capability
Equipped with over-current Detection & Protection
Connects up to 127 USB devices
III.
Dimensions: 90*101*25mm (length*width*height)
Specification
Gross weight: 240g
Bus power mode only
Root Hub with 4 downstream facing ports which are shared by OHCI & EHCI Host
Controller core
1 upstream port & 4 downstream ports
Led status indicators
Supports Windows 98/98 SE/Me/2000/XP/Vista/7 and Mac OS 8.6 or greater

Summary of content (6 pages)