USER GUIDE WIRELESS USB HUB AND ADAPTER KIT/ WIRELESS USB DEVICE ADAPTER KIT Model: 29570 (4-port Hub) /29571 (1-port Device Adapter) 1
TABLE OF CONTENTS Introduction.................................................................................................................................................2 Features......................................................................................................................................................3 System Requirements.................................................................................................................................4 Package Contents.........
INTRODUCTION Thank you for purchasing the TruLink™ Wireless USB Hub and Adapter Kit. This product utilizes the latest in wireless technology, so you can connect USB enabled devices such as printers, external hard drives, and digital cameras up to 30 feet away. With a highly secure connection you can use this product in settings such as corporate offices, classrooms, or in your home office/entertainment system. We recommend that you read this manual thoroughly and retain for future reference.
FEATURES Full support for printers, scanners, cameras, MP3 players, external hard drives, and other USB peripherals Access and device-sharing support for as many as three associated computers Certified by the USB-IF, guaranteeing connectivity with all Certified Wireless USB™ products Based on Ultra Wide Band technology, providing speedy data transfer and low power consumption Convenient plug-and-play connectivity, with simple software installation and setup 3
SYSTEM REQUIREMENTS Microsoft® Windows® XP or Microsoft® Vista® 32-bit 4
PACKAGE CONTENTS Wireless USB Host Adapter for your computer Wireless USB Hub for your USB devices Two (2) Dipole Antennas (for USB Adapter and USB Hub) 3ft USB A Male/Mini-B Male Cable USB Extender with Cradle One (1) Power Adapter User Manual Quick Start Guide Driver CD 5
DEVICE OVERVIEW WIRELESS USB HOST ADAPTER 1. Link: Data Connection Indicator • LED is solid when transfer device is connected • LED blinks when data is being transferred 2.
DEVICE OVERVIEW WIRELESS USB HUB (4-PORT)-29570 1. PWR: Power Indicator • LED is solid when power is applied 2. 1-2-3-4: USB Status Indicator • Illuminated number/symbol indicates the USB port/s that is currently synced with a USB enabled device 3. PWR plug • Power adapter socket 4. USB (mini-B) port • In wireless mode, this connector is used for cable association 2 5 • In wired mode, this connector is used for wired operation 5. USB A ports (4) • Plug in USB enabled devices 3 6.
DEVICE OVERVIEW WIRELESS USB DEVICE ADAPTER (1-PORT)-29571 1. PWR: Power Indicator • LED is solid when power is applied. 2. PWR plug • Power adapter socket 3. USB A port • Connect a USB enabled device 4. USB (mini-B) connector • In wireless mode, this connector is used for cable association • In wired mode, this connector is used for wired operation 5. WIRELESS/WIRED switch • Choose from wired or wireless mode by using this switch.
SOFTWARE/DEVICE INSTALLATION IMPORTANT NOTE: • If installing on Windows XP, Service Pack 2 (SP2) is required. Verify that this has been installed before installing the Wireless USB Hub and Adapter Kit software. • Before installing the software, make sure that the Wireless USB Host Adapter and Wireless USB Hub Adapter are not connected to the computer, and the Wireless USB Hub Adapter is not powered.
SOFTWARE/DEVICE INSTALLATION This will take you to the TruLink Wireless USB Kit InstallShield Wizard. Click “Next” to go to proceed with the install. Read and accept the Wireless USB Kit software License Agreement by clicking “Yes”.
SOFTWARE/DEVICE INSTALLATION After the software installs your installation is complete and you can hit the “Finish” button to exit the wizard. Important: reboot/restart if prompted. Step 2-Driver Installation for the Wireless USB Host Adapter 1. Open the Wireless USB Manager by double-clicking the icon on the icon tray at the bottom of your desktop.
SOFTWARE/DEVICE INSTALLATION The Wireless USB Manager will open and instruct you on what to do next. Figure: Getting Started Screen 2. Make sure the antenna is connected to the Wireless USB Host Adapter. 3. Plug the Wireless USB Host Adapter into any available USB port on your computer. You also have the option to connect the Wireless USB Host Adapter to the USB Cradle provided in the package if you need to make the Adapter more mobile.
SOFTWARE/DEVICE INSTALLATION Windows will automatically install the appropriate Wireless USB Host Adapter drivers and you will get a Successful Install message pop-up such as the following to let you know it was successful. Figure: Successful Install Message In the Wireless USB Manager, the TruLink Hub icon will appear in grey letting you know it is ready for connection.
SOFTWARE/DEVICE INSTALLATION Step 3 – Driver Installation for the Wireless USB Hub 1. Make sure the antenna is connected to the Wireless USB Hub. 2. Plug the supplied power adapter into your Wireless USB Hub. Windows will automatically install the appropriate Wireless USB Hub drivers and you will get another Successful Install Message pop-up such as on page 13 verifying successful installation.
SOFTWARE/DEVICE INSTALLATION You can now connect your USB enabled devices to the Wireless USB Hub (1-port as shown below) just as you would to your computer. Your devices will follow the same plug and unplug process so you may need to first eject your USB device from your PC before unplugging it from the Wireless USB Hub if you need to unplug it for any reason.
USING THE WIRELESS USB KIT WIRELESS USB MANAGER The Wireless USB Manager is simple and easy to use interface to manage your Wireless USB devices and control your Wireless USB Host Adapter settings. The Wireless USB Manager can be accessed via Wireless USB Manager Icon in the Windows tray (Figure: Wireless USB Manager Icon). Figure: Wireless USB Manager Icon To launch the Wireless USB Manager, double click on the Wireless USB Manager icon.
USING THE WIRELESS USB KIT The VIEW menu will give the option of what type of devices you wish to display (All Devices, Connected Devices and Not Connected Devices). The OPTIONS menu will give the option to launch Host Settings window and turn the Wireless USB Host Adapter radio on or off. The HELP menu offers quick help on how to connect devices to your Wireless USB Host Adapter.
USING THE WIRELESS USB KIT To manage the Wireless USB Host Adapter settings, either select “Host Settings” in the “Option” menu of the Wireless USB Manager application or right click on the Wireless USB Manager icon in the Windows tray. GENERAL TAB (Figure: Host Settings – General) 1. Enable this Wireless USB radio: turn on or off the Wireless USB radio. 2. Host name: Change the name of your Wireless USB Host Adapter. 3. Cable association connection rules*: Always, Never or Ask me each time.
USING THE WIRELESS USB KIT ADVANCED TAB (Figure: Host Settings – Advanced) 1. Channel selection: this function allows you to set manually a radio channel for the wireless communication (combination of Band Group and Channel). For optimal performance, the automatic setting is recommended.
USING THE WIRELESS USB KIT USING YOUR WIRELESS USB HUB IN WIRED MODE Your Wireless USB Hub can also be used wired mode. Make sure the position of the WIRELESS/WIRED switch is in the WIRED position. Plug the USB cable between your computer and the Wireless USB Hub. The function is the same as the wireless mode but data will be transferred through the cable and not use the Wireless USB Host Adapter.
TECHNICAL SPECIFICATIONS Operating System Support Microsoft XP 32-bit; Microsoft Vista 32-bit PHY Data Rate 53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps, 200Mbps, 320Mbps, 400Mbps, 480Mbps Operating Range Up to 30 feet (10 meters) Frequency 3.1GHz to 4.8GHz (WiMedia Band Group 1) Number of Channel 7 channels (3 FFI + 4 TFI) RF Modulation Type QPSK/DCM Interface USB 2.0 USB Specification Certified Wireless USB 1.0; USB 2.
CABLES TO GO™ WARRANTY STATEMENT At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-293-4970 or www.cablestogo.com. Cables To Go 3555 Kettering Blvd. Moraine, OH 45439 1-800-826-7904 www.cablestogo.
IMPORTANT SAFETY INFORMATION ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product.
FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is authorized under 47 CFR 15.519 (the FCC Rules and Regulations).
APPENDIX CABLE ASSOCIATION WITH OTHER DEVICES ASSOCIATION CONCEPT In order to establish a secure wireless connection, both the Wireless USB Host Adapter and the Wireless USB devices must exchange information about each other. This is done via cable or pin association. Note that your Wireless USB kit has been pre-associated for your convenience and the process described below has been done for you.
APPENDIX CABLE ASSOCIATION PROCEDURE Cable association steps: Examples/Figures shown used with the association of the TruLink Wireless USB to VGA Adapter 1. Make sure that the Wireless USB Manager is running. Check your Windows tray for the Wireless USB Manager icon (Figure: Wireless USB Manager). 2. Make sure the WIRELESS/WIRED switch is in the WIRELESS position 3. Power on your Wireless USB Device Adapter (TruLink Wireless USB to VGA Adapter). 4.
APPENDIX Associated Wireless USB Device Adapters will appear as icons in the Wireless USB Manager. When the Wireless USB Device Adapter is connected to your computer, the icon will appear in color (Figure: Wireless VGA Adapter and TruLink Hub Connected). Display: All Devices Figure: Wireless VGA Adapter and TruLink Hub Connected Note: You may rename or delete the Wireless USB Device Adapter by right-clicking the device icon in the Wireless USB Manager and select “rename” or “delete”.
APPENDIX PIN ASSOCIATION PROCEDURE Pin association steps: Examples/Figures shown used with the association of the TruLink Wireless USB to VGA Adapter 1. Make sure your Wireless USB Device Adapter is powered on and your Wireless USB Host Adapter is connected to your computer. Click the “Discovery Mode” button (Figure: Discovery Mode Screen).
APPENDIX 2. The Wireless USB Host will search for any available Wireless VGA Adapter within its range. Note that this operation can take up to 20 seconds (Figure: Discovery Mode in Process). Figure: Discovery Mode in Process 3. Once the Wireless USB Host Adapter and the Wireless VGA Adapter have exchanged security information, the following dialog will appear.
APPENDIX 4. Enter the PIN of the Wireless VGA Adapter (4-digit PIN) and click Accept Association. The Wireless VGA Adapter and Wireless USB Host Adapter are now associated and ready for operation. PIN CHANGE PROCEDURE The default PIN setting for the Wireless USB Hub is “1234”. This section gives you the instructions to change the PIN to another 4-Digit value. IMPORTANT: The application used to change the PIN is not supported in Vista 64bit. 1.
APPENDIX 3. Make sure the WIRELESS/WIRED switch on your Wireless VGA Adapter is in the WIRELESS position and the power cable is plugged in your Wireless VGA Adapter. Connect the USB cable between your Wireless VGA Adapter and any available USB port on your computer.
APPENDIX 4. Click Install this driver software anyway. 5.
APPENDIX 6. Enter a 4-Digit PIN (0-9) and click OK. 7. If your PIN is valid, a Window displaying your new PIN will appear. Press OK. Your PIN has been successfully changed. IMPORTANT: please exit the Trulink PIN Utility application (Exit button as shown on figure in step 5) before unplugging the USB cable between your Wireless VGA Adapter and your PC.
For more information on this product or to check for updated drivers, manuals or frequently asked questions please visit our website. www.cablestogo.com VER. 2.0.4.28.
