User guide

4. Enter the PIN of the Wireless Audio Device Adapter (4-digit PIN) and click Accept Association (Note:

the default PIN is “1234”). The Wireless Audio Device Adapter and Wireless USB Host Adapter are

now associated and ready for operation.

PIN CHANGE PROCEDURE

The default PIN setting for the Wireless Audio Device Adapter is “1234”. This section gives you the

instructions to change the PIN to another 4-Digit value.

IMPORTANT: The application used to change the PIN is not supported in Vista 64bit.

1. Make sure your Wireless USB Host Adapter and the Wireless Audio Device Adapter are not connected

to your computer.

2. Open/Launch the application “Pin Update” (C:\Program Files\Wireless USB

Manager\Utility\PINUpdate). The following dialog will appear:

APPENDIX