USER GUIDE WIRELESS AUDIO DEVICE ADAPTER Model: 29595 1
TABLE OF CONTENTS Introduction.................................................................................................................................................2 Features......................................................................................................................................................3 System Requirements.................................................................................................................................4 Package Contents.........
INTRODUCTION Thank you for purchasing the TruLink™ Wireless Audio Device Adapter. When paired with a Certified Wireless USB Host Adapter, enables wireless streaming of audio from your computer to a sound system, projector or television. Ultra-Wide Band technology enables secure, in-room wireless connectivity at distances up to 30 feet between the computer and the audio device. Wireless audio provides an effective solution at home, in a classroom, or in a conference room.
FEATURES In-room wireless connectivity up to 30 feet Audio conversion from USB to 3.5mm stereo Up to six computers can share one wireless audio device, or one computer can stream audio to as many as six audio devices* Ultra-Wide Band operates in the frequency range of 3.1GHz to 4.8GHz (WiMedia™ Band Group 1) Certified Wireless USB 1.0™ compliant WiMedia 1.0 MAC & 1.
SYSTEM REQUIREMENTS Microsoft® Windows® XP 32-bit with Service Pack 3 or higher or Microsoft® Vista® 32-bit/64-bit Certified Wireless USB host adapter for your computer (Not included) 4
PACKAGE CONTENTS Wireless Audio Device Adapter for your audio device One (1) Dipole Antenna 3ft USB A Male/Mini-B Male Cable One (1) Power Adapter (cord approx.
DEVICE OVERVIEW WIRELESS AUDIO DEVICE ADAPTER 2 1. Activity Indicator • LED is solid when display cable is connected. 1 • LED is blinking when data is being transferred. 2. PWR: Power Indicator • LED is solid when power is applied. 3. PWR plug • Power adapter socket 4. USB connector • In wireless mode, this connector is used for cable association • In wired mode, this connector is used for wired operation 5. 3.
SOFTWARE/DEVICE INSTALLATION STEP 1 (IF NECESSARY)-DRIVER INSTALLATION FOR THE WIRELESS USB HOST ADAPTER (SOLD SEPARATELY) 1. Install your Wireless USB host adapter if you have not already done so. Please refer to your Wireless USB host adapter instructional guide or you may try to contact the manufacturer for the proper driver installation process. 2. Your Wireless USB host software utility may create an icon in your icon tray.
SOFTWARE/DEVICE INSTALLATION STEP 2-CONNECT THE WIRELESS AUDIO DEVICE ADAPTER 1. Connect the Wireless Audio Device Adapter 3.5mm Stereo Audio Input to your PC audio speakers, sound system, projector or television using the appropriate cable or adapter types.
SOFTWARE/DEVICE INSTALLATION STEP 3 – DEVICE INSTALLATION FOR THE TRULINK WIRELESS AUDIO DEVICE ADAPTER The TruLink Wireless Audio Device Adapter supports two association methods: Cable Association and PIN Association. Only one of these methods is necessary to complete installation. The instructions below describe steps for both methods. Please note that PIN Association is only recommended if using with a TruLink Wireless USB Host Adapter (part number: 29578) to ensure compatibility.
SOFTWARE/DEVICE INSTALLATION PIN ASSOCIATION For PIN Association, it is strongly recommended that you use a TruLink Wireless USB Host Adapter, as some other Wireless USB host adapters may not support the PIN feature. To PIN associate with the TruLink Wireless USB Host Adapter, please do the following: 1. Make sure the Wireless Audio Device Adapter Wireless/Wired switch is on Wireless. 2. Open the Wireless USB Manager, and click the Discovery button.
SOFTWARE/DEVICE INSTALLATION VERIFY CONNECTION To verify connection from Cable or PIN Association, you can open the Wireless USB host manager utility and you should have an icon displayed representing the TruLink Wireless Audio Device Adapter.
FREQUENTLY ASKED QUESTIONS 1. My Wireless USB Host Adapter is plugged into my computer and my Wireless Audio Adapter is powered but I do not hear anything out of my speakers. What’s wrong? Check the Wireless USB Manager to see if there is an icon for your Wireless Audio Adapter. If there is no icon, try unplugging and then plugging in your Wireless USB Host Adapter to reload the Wireless Audio Adapter.
TECHNICAL SPECIFICATIONS Audio Output 2 CH DAC output Dynamic Range 95db, THD+N -85db ~ 91db Sample Rate 8KHz, 16KHz, 44.1KHz, to 48KHz with 16-bit resoultion Operating System Support Microsoft XP 32-bit; Microsoft Vista 32-bit/64-bit Operating Range Up to 30 feet (10 meters) PHY Data Rate 53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps, 200Mbps, 320Mbps, 400Mbps, 480Mbps Frequency 3.1GHz to 4.
CABLES TO GO™ WARRANTY STATEMENT At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-293-4970 or www.cablestogo.com. Cables To Go 3555 Kettering Blvd. Moraine, OH 45439 1-800-826-7904 www.cablestogo.
IMPORTANT SAFETY INFORMATION ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product.
APPENDIX CABLE ASSOCIATION WITH OTHER DEVICES ASSOCIATION CONCEPT In order to establish a secure wireless connection, both your Wireless USB host adapter and the Wireless Audio Device Adapter must exchange information about each other. This is done via cable or PIN association. ASSOCIATION PROCESS If you purchase additional Certified Wireless USB Host Adapters, such as the TruLink Wireless USB Host Adapter, you will need to associate them with your Wireless Audio Device Adapter.
APPENDIX CABLE ASSOCIATION PROCEDURE Cable association steps: Examples/Figures shown used with the association of the TruLink Wireless Audio Device Adapter when used with the TruLink Wireless USB Host Adapter. This process will vary by manufacturer of your Wireless USB host adapter. 1. Make sure that the Wireless USB host adapter utility is running. Check your Windows tray for the Wireless USB Manager icon (Figure: Wireless USB Manager p.10). 2.
APPENDIX Associated Certified Wireless USB Devices will appear as icons in the Wireless USB Manager. When the Certified Wireless USB Devices are connected, the icon will appear in color (Figure: Wireless Audio Adapter Connected). Figure: Wireless Audio Adapter Connected Note: You may rename or delete the Wireless USB Device by right-clicking the device icon in the Wireless USB Manager and select “rename” or “delete”.
APPENDIX PIN ASSOCIATION PROCEDURE PIN association steps: Examples/Figures shown used with the association of the TruLink Wireless Audio Device Adapter when used with the TruLink Wireless USB Host Adapter. 1. Make sure your Wireless Audio Device Adapter is powered on and your Wireless USB host adapter is connected to your computer. Click the “Discovery Mode” button (Figure: Discovery Mode Screen).
APPENDIX 2. The Wireless USB host will search for the Wireless Audio Device Adapter within its range. Note that this operation can take up to 20 seconds (Figure: Discovery Mode in Process). Figure: Discovery Mode in Process 3. Once the Wireless USB host adapter and the Wireless Audio Device Adapter have exchanged security information, a PIN Association dialog will appear.
APPENDIX 4. Enter the PIN of the Wireless Audio Adapter (4-digit PIN) and click Accept Association. The Wireless Audio Adapter and Wireless USB Host Adapter are now associated and ready for operation. PIN CHANGE PROCEDURE The default PIN setting for the Wireless Audio Device Adapter is “1234”. This section gives you the instructions to change the PIN to another 4-Digit value. IMPORTANT: The application used to change the PIN is not supported in Vista 64bit. 1.
APPENDIX 3.
APPENDIX 4. Click Install this driver software anyway. 5.
APPENDIX 6. Enter a 4-Digit PIN (0-9) and click OK. 7. If your PIN is valid, a window displaying your new PIN will appear. Press OK. Your PIN has been successfully changed. IMPORTANT: please exit the Trulink PIN Utility application (Exit button as shown on figure in step 5) before unplugging the USB cable between your Wireless AUDIO Adapter and your PC.
25
For more information on this product or to check for updated drivers, manuals or frequently asked questions please visit our website. www.cablestogo.com VER. 1.0.6.19.
